P0806 Dodge Code - Clutch Position Sensor Circuit Range/Performance
Quick Answer
The Transmission Control Module (TCM) monitors the Clutch Position Sensor signal. Common causes include Faulty Clutch Position Sensor, Clutch Position Sensor harness is open or shorted, Clutch Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0806 Dodge indicates Clutch Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Clutch Position Sensor, Clutch Position Sensor harness is open or shorted, Clutch Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0806 Dodge Description
What are the Possible Causes of the DTC P0806 Dodge?
- Faulty Clutch Position Sensor
- Clutch Position Sensor harness is open or shorted
- Clutch Position Sensor circuit poor electrical connection
How to Fix the DTC P0806 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0806 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0806 Dodge code?
Need more information on how to fix the P0806 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0806 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0806 Dodge Code
1. What does the OBDII code P0806 mean on a Dodge?
P0806 indicates an issue with the clutch position sensor circuit, specifically a range or performance problem where the sensor's signal is outside the expected parameters.
2. What are the symptoms of the P0806 code on a Dodge vehicle?
Common symptoms include difficulty shifting gears, erratic clutch pedal operation, reduced vehicle performance, and potentially an illuminated check engine light.
3. What causes the P0806 code to appear?
Causes can include a faulty clutch position sensor, damaged or corroded wiring in the sensor circuit, a misaligned sensor, or, in rare cases, a problem with the vehicle's powertrain control module (PCM).
4. Can I continue driving my Dodge with the P0806 code?
While it may be possible to drive the vehicle, ignoring the issue could lead to further damage to the transmission or clutch system. It's best to address the problem promptly.
5. How is the P0806 code diagnosed?
A technician will use a scan tool to check for stored codes, inspect the clutch position sensor and its wiring, test the sensor's signal, and verify the alignment and operation of the clutch system.
6. How do you fix the P0806 code on a Dodge?
Repairs may involve replacing the clutch position sensor, repairing or replacing damaged wiring or connectors, realigning the sensor, or addressing any underlying transmission issues.
7. How much does it cost to fix the P0806 code?
The cost depends on the exact cause but typically ranges from $150 to $300 for parts and labor, with variations depending on your Dodge model and location.
8. Can a faulty clutch position sensor cause transmission damage?
Yes, if the sensor is providing incorrect data, it may lead to improper clutch engagement or shifting, potentially causing wear or damage to the transmission over time.
9. Does the P0806 code always mean the clutch position sensor is bad?
No, the issue could also stem from wiring problems, connector issues, or even a malfunction in the PCM, so proper diagnosis is crucial.
10. Can I reset the P0806 code without fixing the problem?
While clearing the code temporarily removes it, the issue will likely return unless the underlying problem is resolved.
Discuss the causes and fixes for P0806 Dodge OBDII Code
Code P0806 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
