P0806 2017 Chevrolet Silverado Code - Clutch Pedal Position Sensor Performance
Quick Answer
The Clutch Pedal Position (CPP) sensor is a three-wire sensor, connected to a 5 V reference circuit, a low reference circuit, and a signal circuit. Common causes include Faulty Clutch Pedal Position (CPP) Sensor, Clutch Pedal Position Sensor harness is open or shorted, Clutch Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0806 2017 Chevrolet Silverado indicates Clutch Pedal Position Sensor Performance.
- Common causes
- Common causes include Faulty Clutch Pedal Position (CPP) Sensor, Clutch Pedal Position Sensor harness is open or shorted, Clutch Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0806 2017 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0806 2017 Chevrolet Silverado?
- Faulty Clutch Pedal Position (CPP) Sensor
- Clutch Pedal Position Sensor harness is open or shorted
- Clutch Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0806 2017 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0806 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0806 2017 Chevrolet Silverado code?
Need more information on how to fix the P0806 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0806 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0806 2017 Chevrolet Silverado Code
1. What does the OBDII code P0806 mean on a 2017 Chevrolet Silverado?
The P0806 code indicates an issue with the clutch pedal position sensor's performance, which monitors and reports the position of the clutch pedal to the vehicle's computer.
2. What are common symptoms of the P0806 code in a Chevy Silverado?
Symptoms may include difficulty starting the engine, the clutch pedal feeling unresponsive, the Check Engine Light illuminated, or erratic shifting in manual transmission models.
3. What causes the P0806 code to appear in a 2017 Silverado?
Possible causes include a faulty clutch pedal position sensor, damaged or corroded wiring, a poor electrical connection, or a malfunction in the vehicle's Powertrain Control Module (PCM).
4. Can I drive my Silverado with the P0806 code?
Driving with the P0806 code is not recommended, as it can cause starting issues, unsafe clutch performance, or further damage to the transmission system.
5. How do I diagnose the P0806 code on my Silverado?
Start by checking the clutch pedal position sensor for visible damage, inspecting the wiring and connectors for corrosion or loose connections, and using a scan tool to verify sensor readings.
6. How is the P0806 code fixed?
Repairs may include replacing the clutch pedal position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the PCM if needed.
7. How much does it cost to fix the P0806 code in a 2017 Silverado?
The repair cost depends on the specific issue but typically ranges from $100 to $300 for sensor replacement, not including labor costs.
8. Can a bad clutch pedal position sensor cause starting problems?
Yes, a faulty clutch pedal position sensor can prevent the engine from starting because the PCM may not detect the clutch is engaged.
9. Does the P0806 code affect automatic transmission Silverados?
No, the P0806 code only applies to manual transmission models with a clutch pedal position sensor.
10. Can I reset the P0806 code without fixing the problem?
Clearing the code with a scan tool may temporarily remove it, but the issue will likely return until the underlying problem is resolved.
Discuss the causes and fixes for P0806 2017 Chevrolet Silverado OBDII Code
Code P0806 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
