P07C5 2014 Toyota RAV4 Code - Intermediate Shaft Speed Sensor 'A' Circuit Low
Quick Answer
This sensor detects the rotation speed of the counter gear which indicates the output speed of the transaxle. Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P07C5 2014 Toyota RAV4 indicates Intermediate Shaft Speed Sensor 'A' Circuit Low.
- Common causes
- Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P07C5 2014 Toyota RAV4 Description
The NT terminal of the ECM detects a pulse signal from the speed sensor NT (input RPM). The ECM calculates gear shifts by comparing the signal from speed sensor NT with the signal from speed sensor NC.
While the vehicle is operating in 2nd, 3rd, 4th, or 5th gear with the shift lever in D, if the input shaft speed is less than 300 rpm although the output shaft speed is more than 1000 rpm, the ECM interprets this as a fault, illuminates the MIL and stores the Diagnostic Trouble Code (DTC). P07C5 code is detected when the speed sensor input voltage is below 0.1 V for 2 sec. or more.
What are the Possible Causes of the DTC P07C5 2014 Toyota RAV4?
- Faulty Speed sensor NC (Transmission Revolution Sensor)
- Speed sensor NC harness is open or shorted
- Speed sensor NC circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P07C5 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P07C5 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P07C5 2014 Toyota RAV4 code?
Need more information on how to fix the P07C5 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P07C5 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P07C5 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P07C5 in a 2014 Toyota RAV4?
The common symptoms of OBDII code P07C5 (Intermediate Shaft Speed Sensor 'A' Circuit Low) in a 2014 Toyota RAV4 may include issues with the vehicle's transmission, such as rough shifting, delayed shifting, or even the transmission going into limp mode.
2. What are the possible causes of OBDII code P07C5 in a 2014 Toyota RAV4?
The possible causes of OBDII code P07C5 in a 2014 Toyota RAV4 include a faulty intermediate shaft speed sensor, damaged wiring or connectors related to the sensor, or a malfunction in the transmission control module.
3. How can I diagnose OBDII code P07C5 in my 2014 Toyota RAV4?
Diagnosing OBDII code P07C5 in a 2014 Toyota RAV4 involves using a diagnostic scanner to retrieve the fault code, checking the wiring and connectors of the intermediate shaft speed sensor, and testing the sensor itself for proper functionality.
4. Can I continue driving my 2014 Toyota RAV4 with OBDII code P07C5?
It is not recommended to continue driving your 2014 Toyota RAV4 with OBDII code P07C5, as it can lead to further damage to the transmission system. It is advisable to have the issue diagnosed and repaired as soon as possible.
5. How can I repair OBDII code P07C5 in my 2014 Toyota RAV4?
Repairing OBDII code P07C5 in a 2014 Toyota RAV4 typically involves replacing the faulty intermediate shaft speed sensor, repairing or replacing damaged wiring or connectors, and clearing the fault code with a diagnostic scanner.
6. Is OBDII code P07C5 a common issue in 2014 Toyota RAV4 vehicles?
While OBDII code P07C5 (Intermediate Shaft Speed Sensor 'A' Circuit Low) is not extremely common in 2014 Toyota RAV4 vehicles, it can still occur due to sensor failures or wiring issues.
7. Can a DIY enthusiast fix OBDII code P07C5 in a 2014 Toyota RAV4?
A DIY enthusiast with the necessary tools and knowledge of automotive repairs may be able to fix OBDII code P07C5 in a 2014 Toyota RAV4 by following repair guides or tutorials specific to this code and vehicle model.
8. Will resetting the check engine light resolve OBDII code P07C5 in my 2014 Toyota RAV4?
Simply resetting the check engine light will not resolve OBDII code P07C5 in a 2014 Toyota RAV4. The underlying issue causing the fault code needs to be diagnosed and repaired to prevent the code from reoccurring.
9. How much does it cost to repair OBDII code P07C5 in a 2014 Toyota RAV4?
The cost to repair OBDII code P07C5 in a 2014 Toyota RAV4 can vary depending on the root cause of the issue, the cost of parts, and labor rates. It is advisable to consult a mechanic or repair shop for an accurate estimate.
10. Can extreme weather conditions affect OBDII code P07C5 in a 2014 Toyota RAV4?
Extreme weather conditions, such as extreme heat or cold, can potentially affect the performance of the intermediate shaft speed sensor and contribute to triggering OBDII code P07C5 in a 2014 Toyota RAV4.
Discuss the causes and fixes for P07C5 2014 Toyota RAV4 OBDII Code
Code P07C5 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
