P07C5 2013 Toyota RAV4 Code - Intermediate Shaft Speed Sensor 'A' Circuit Low
Quick Answer
This sensor detects the rotation speed of the counter gear which indicates the output speed of the transaxle. Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P07C5 2013 Toyota RAV4 indicates Intermediate Shaft Speed Sensor 'A' Circuit Low.
- Common causes
- Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P07C5 2013 Toyota RAV4 Description
The NT terminal of the ECM detects a pulse signal from the speed sensor NT (input RPM). The ECM calculates gear shifts by comparing the signal from speed sensor NT with the signal from speed sensor NC.
While the vehicle is operating in 2nd, 3rd, 4th, or 5th gear with the shift lever in D, if the input shaft speed is less than 300 rpm although the output shaft speed is more than 1000 rpm, the ECM interprets this as a fault, illuminates the MIL and stores the Diagnostic Trouble Code (DTC). P07C5 code is detected when the speed sensor input voltage is below 0.1 V for 2 sec. or more.
What are the Possible Causes of the DTC P07C5 2013 Toyota RAV4?
- Faulty Speed sensor NC (Transmission Revolution Sensor)
- Speed sensor NC harness is open or shorted
- Speed sensor NC circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P07C5 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P07C5 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P07C5 2013 Toyota RAV4 code?
Need more information on how to fix the P07C5 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P07C5 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P07C5 2013 Toyota RAV4 Code
1. What does the OBDII code P07C5 mean for a 2013 Toyota RAV4?
P07C5 indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically that the circuit is reading a low voltage or signal.
2. What are the symptoms of code P07C5 in a 2013 Toyota RAV4?
Common symptoms include erratic shifting, transmission slipping, reduced fuel efficiency, and the Check Engine Light turning on.
3. What causes the P07C5 code on a 2013 Toyota RAV4?
Possible causes include a faulty intermediate shaft speed sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or low transmission fluid.
4. Can I drive my 2013 Toyota RAV4 with the P07C5 code?
Driving with this code is not recommended, as it can lead to further transmission damage and poor vehicle performance.
5. How do I fix the P07C5 code on my 2013 Toyota RAV4?
Repairs may include replacing the intermediate shaft speed sensor, repairing or replacing damaged wiring, clearing debris from connectors, or updating/reprogramming the TCM.
6. How much does it cost to repair the P07C5 code on a 2013 Toyota RAV4?
Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the sensor or wiring needs replacement.
7. Where is the intermediate shaft speed sensor located on a 2013 Toyota RAV4?
The intermediate shaft speed sensor is usually located inside the transmission housing and monitors the speed of the intermediate shaft.
8. Can low transmission fluid cause the P07C5 code on a 2013 Toyota RAV4?
Yes, low or dirty transmission fluid can lead to improper sensor operation and trigger the P07C5 code.
9. How can I diagnose the P07C5 code on my 2013 Toyota RAV4?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the wiring and connectors, and testing the sensor for proper voltage and signal output.
10. Will clearing the P07C5 code fix the issue on my 2013 Toyota RAV4?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P07C5 2013 Toyota RAV4 OBDII Code
Code P07C5 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
