P0797 2006 NISSAN ALTIMA SEDAN Code - Pressure Control Solenoid 'C' Stuck On
|P0797 2006 NISSAN ALTIMA SEDAN code possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty pressure control solenoid valve 'C'
- Pressure control solenoid valve 'C' harness is open or shorted
- Pressure control solenoid valve 'C' circuit poor electrical connection
|How do I fix the P0797 2006 NISSAN ALTIMA SEDAN code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0797 2006 NISSAN ALTIMA SEDAN code tech notesWhen a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.
|Cost of diagnosing the P0797 2006 NISSAN ALTIMA SEDAN code
Labor: 1.0The cost of diagnosing the P0797 2006 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0797 2006 NISSAN ALTIMA SEDAN code detected?The gear required by the ECM does not match the actual gear when driving
|What are P0797 2006 NISSAN ALTIMA SEDAN code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Shift shock
|P0797 2006 NISSAN ALTIMA SEDAN code descriptionThe Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
|Need more information with the P0797 2006 NISSAN ALTIMA SEDAN code?Need more information on how to fix the P0797 2006 NISSAN ALTIMA SEDAN code? Get Access to Factory Service Manuals
|Need help with a P0797 2006 NISSAN ALTIMA SEDAN code?Get the P0797 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
|P0797 2006 NISSAN ALTIMA SEDAN code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0797 2006 Nissan Altima Sedan code? Have you replaced any parts?
Any information is appreciated. Thanks