P0796 2010 TOYOTA CAMRY - Pressure Control Solenoid 'C' Performance Valve SL3
P0796 2010 TOYOTA CAMRY Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty pressure control solenoid valve SL3
- Pressure control solenoid valve SL3 harness is open or shorted
- Pressure control solenoid valve SL3 circuit poor electrical connection
How do I fix code P0796 2010 TOYOTA CAMRY?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0796 2010 TOYOTA CAMRY code
Labor: 1.0The cost of diagnosing the P0796 2010 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?The gear required by the ECM does not match the actual gear when driving
- Engine Light ON (or Service Engine Soon Warning Light)
- Shift shock
P0796 2010 TOYOTA CAMRY DescriptionShifting from 1st to 5th is performed in combination with ON and OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail Safe Function).
More InformationNeed more information on how to fix the P0796 2010 TOYOTA CAMRY code?
Get Access to Factory Service Manuals
Need more help?Get the P0796 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0796 2010 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks