AutoCodes – Acura – P0795 Acura

P0795 Acura Code - Pressure Control Solenoid Valve 'C'

Quick Answer

The pressure control solenoid valve 'C' is normally low pressure control solenoid. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty pressure control solenoid valve 'C'. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0795 Acura indicates Pressure Control Solenoid Valve 'C'.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty pressure control solenoid valve 'C'.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,018

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0795 Acura Description

The pressure control solenoid valve 'C' is normally low pressure control solenoid. The solenoid is activated to control the apply and release of the 2nd brake and 1st and reverse brake, and torque converter clutch. Lock-up operation, however, is prohibited when A/T fluid temperature is too low. When the accelerator pedal is depressed (less than 1/8) in lockup condition, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.

OBDII Code P0795 Acura - Pressure Control Solenoid Valve 'C' - AutoCodes.com — P0795 Acura Code - Pressure Control Solenoid Valve 'C'

What does this mean?

What are the Possible Causes of the DTC P0795 Acura?

Low transmission fluid level
Dirty transmission fluid
Faulty pressure control solenoid valve 'C'
Pressure control solenoid valve 'C' harness is open or shorted
Pressure control solenoid valve 'C' circuit poor electrical connection

How to Fix the DTC P0795 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0795 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0795 Acura code?

Need more information on how to fix the P0795 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0795 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.