AutoCodes – Acura – P0793 Acura

P0793 Acura Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal

Quick Answer

The Continuously Variable Transmission (CVT) drive pulley speed sensor is attached to the outside of the end cover. Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0793 Acura indicates Intermediate Shaft Speed Sensor 'A' Circuit No Signal.
Common causes: Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 293

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0793 Acura Description

The Continuously Variable Transmission (CVT) drive pulley speed sensor is attached to the outside of the end cover. The CVT drive pulley speed sensor detects the number of revolutions of the gear on the drive pulley and sends a pulsing signal to the Powertrain Control Module (PCM). The PCM converts the pulsing signal into drive pulley speed. If no pulses occur with the drive pulley rotating, the PCM detects a malfunction that may be caused by an open, an intermittent open, or a short to ground. Based on the correlation between the CVT drive pulley speed sensor and the torque converter turbine speed sensor, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0793 Acura - Intermediate Shaft Speed Sensor 'A' Circuit No Signal - AutoCodes.com — P0793 Acura Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal

What does this mean?

What are the Possible Causes of the DTC P0793 Acura?

Faulty CVT Drive Pulley Speed Sensor
CVT Drive Pulley Speed Sensor harness is open or shorted
CVT Drive Pulley Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0793 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0793 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0793 Acura code?

Need more information on how to fix the P0793 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0793 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0793 Acura Code

1. What does the OBDII code P0793 mean on an Acura?

P0793 indicates a problem with the Intermediate Shaft Speed Sensor 'A' Circuit, specifically a lack of signal being detected by the vehicle's transmission control module.

2. What are the common symptoms of code P0793 on an Acura?

Symptoms may include erratic shifting, transmission staying in one gear, reduced fuel efficiency, or the Check Engine Light illuminated.

3. What causes the P0793 code on an Acura?

Common causes include a faulty intermediate shaft speed sensor, damaged wiring or connectors, a malfunctioning transmission control module, or internal transmission issues.

4. Can driving with code P0793 cause further damage to an Acura?

Yes, driving with this code can lead to transmission overheating or accelerated wear due to improper shifting, potentially causing more severe damage.

5. How do I diagnose the P0793 code on my Acura?

Start by inspecting the intermediate shaft speed sensor, wiring, and connectors for damage or corrosion. Use a multimeter to test sensor functionality and verify signal continuity.

6. How do I fix code P0793 on an Acura?

Repair or replace the faulty intermediate shaft speed sensor, clean or fix damaged wiring or connectors, and reset the code using an OBDII scanner.

7. How much does it cost to repair an Acura with code P0793?

The cost depends on the issue. Replacing the intermediate shaft speed sensor typically costs $100â€“$300, including parts and labor, but severe transmission problems could be more expensive.

8. Can a faulty intermediate shaft speed sensor affect transmission performance?

Yes, a faulty sensor can disrupt the transmission's ability to determine shaft speed, resulting in poor shifting and reduced drivability.

9. Is code P0793 specific to Acura vehicles?

No, this code can appear in other makes and models with similar transmission setups, but the diagnostic and repair process may vary.

10. Do I need professional help to fix code P0793 on my Acura?

If you are experienced with automotive repairs, you may be able to fix it yourself. Otherwise, consult a certified mechanic to ensure proper diagnosis and repair.