P0793 2018 Honda CR-V Code - Intermediate Shaft Speed Sensor 'A' Circuit No Signal
Quick Answer
The Continuously Variable Transmission (CVT) drive pulley speed sensor is attached to the outside of the end cover. Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0793 2018 Honda CR-V indicates Intermediate Shaft Speed Sensor 'A' Circuit No Signal.
- Common causes
- Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0793 2018 Honda CR-V Description
What are the Possible Causes of the DTC P0793 2018 Honda CR-V?
- Faulty CVT Drive Pulley Speed Sensor
- CVT Drive Pulley Speed Sensor harness is open or shorted
- CVT Drive Pulley Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0793 2018 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0793 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0793 2018 Honda CR-V code?
Need more information on how to fix the P0793 2018 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0793 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0793 2018 Honda CR-V Code
1. What are the common symptoms of OBDII code P0793 in a 2018 Honda CR-V?
The common symptoms of OBDII code P0793 in a 2018 Honda CR-V include issues with shifting gears, hesitation or jerking during acceleration, and the transmission going into limp mode.
2. What does the OBDII code P0793 'Intermediate Shaft Speed Sensor 'A' Circuit No Signal' mean in a 2018 Honda CR-V?
The OBDII code P0793 in a 2018 Honda CR-V indicates that the transmission control module has detected no signal from the intermediate shaft speed sensor 'A', which is responsible for monitoring the speed of the intermediate shaft in the transmission.
3. What are the possible causes of OBDII code P0793 in a 2018 Honda CR-V?
Possible causes of OBDII code P0793 in a 2018 Honda CR-V include a faulty intermediate shaft speed sensor 'A', damaged wiring or connectors related to the sensor, or issues with the transmission control module.
4. How can I diagnose the cause of OBDII code P0793 in my 2018 Honda CR-V?
Diagnosing OBDII code P0793 in a 2018 Honda CR-V involves checking the wiring and connectors related to the intermediate shaft speed sensor 'A', testing the sensor itself for proper functionality, and scanning the transmission control module for any related fault codes.
5. Can I continue driving my 2018 Honda CR-V with OBDII code P0793?
It is not recommended to continue driving your 2018 Honda CR-V with OBDII code P0793, as it can lead to further transmission issues and potential damage. It's best to address the problem promptly to prevent any long-term damage.
6. How can I repair OBDII code P0793 in my 2018 Honda CR-V?
Repairing OBDII code P0793 in a 2018 Honda CR-V may involve replacing the intermediate shaft speed sensor 'A', repairing or replacing damaged wiring or connectors, or resetting the transmission control module after addressing the underlying issue.
7. Is it possible to reset the OBDII code P0793 in a 2018 Honda CR-V without fixing the underlying problem?
Resetting the OBDII code P0793 without fixing the underlying issue, such as a faulty sensor or wiring, may temporarily clear the code, but the problem is likely to reappear once the system detects the issue again. It's important to address the root cause of the code for a lasting solution.
8. How much does it cost to repair OBDII code P0793 in a 2018 Honda CR-V?
The cost of repairing OBDII code P0793 in a 2018 Honda CR-V can vary depending on the cause of the issue, labor costs in your area, and whether you choose to repair it yourself or take it to a professional mechanic. Costs may include parts and labor for sensor replacement or wiring repairs.
9. Are there any preventive maintenance measures to avoid OBDII code P0793 in a 2018 Honda CR-V?
To help prevent OBDII code P0793 in a 2018 Honda CR-V, regular maintenance checks, including inspecting the transmission system, monitoring for any unusual symptoms during driving, and addressing any issues promptly, can help detect and resolve potential problems before they escalate.
10. Can a DIY enthusiast fix OBDII code P0793 in a 2018 Honda CR-V?
If you have the necessary tools, knowledge, and experience working on automotive systems, a DIY enthusiast may be able to fix OBDII code P0793 in a 2018 Honda CR-V by following repair guides, accessing technical resources, and carefully diagnosing and addressing the root cause of the issue.
Discuss the causes and fixes for P0793 2018 Honda CR-V OBDII Code
Code P0793 2018 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
