P0792 2017 Honda CR-V Code - Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance
Quick Answer
The Continuously Variable Transmission (CVT) drive pulley speed sensor is attached to the outside of the end cover. Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0792 2017 Honda CR-V indicates Intermediate Shaft Speed Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty CVT Drive Pulley Speed Sensor, CVT Drive Pulley Speed Sensor harness is open or shorted, CVT Drive Pulley Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0792 2017 Honda CR-V Description
What are the Possible Causes of the DTC P0792 2017 Honda CR-V?
- Faulty CVT Drive Pulley Speed Sensor
- CVT Drive Pulley Speed Sensor harness is open or shorted
- CVT Drive Pulley Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0792 2017 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0792 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0792 2017 Honda CR-V code?
Need more information on how to fix the P0792 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0792 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0792 2017 Honda CR-V Code
1. What does the OBDII code P0792 mean on a 2017 Honda CR-V?
P0792 indicates an issue with the Intermediate Shaft Speed Sensor 'A' circuit, specifically that the sensor's signal is out of its expected range or performing abnormally.
2. What are the common symptoms of the P0792 code in a 2017 Honda CR-V?
Symptoms may include erratic transmission shifting, poor acceleration, reduced fuel efficiency, the transmission staying in one gear, and the illumination of the Check Engine Light.
3. What causes the P0792 code on a 2017 Honda CR-V?
Common causes include a faulty intermediate shaft speed sensor, damaged sensor wiring or connectors, transmission fluid issues, or internal transmission problems.
4. How do you diagnose the P0792 code on a 2017 Honda CR-V?
Diagnosis involves scanning for codes, checking the intermediate shaft speed sensor's wiring and connections, testing the sensor's output, and inspecting the transmission fluid for contamination or low levels.
5. Can I drive my 2017 Honda CR-V with the P0792 code?
While the vehicle may still be drivable, driving with this code can lead to further transmission damage or unsafe driving conditions due to erratic shifting. It’s best to address the issue promptly.
6. How do you fix the P0792 code on a 2017 Honda CR-V?
Repairs may include replacing the intermediate shaft speed sensor, repairing damaged wiring or connectors, replacing or flushing the transmission fluid, or addressing internal transmission issues.
7. How much does it cost to repair the P0792 code on a 2017 Honda CR-V?
The cost depends on the cause. Replacing the intermediate shaft speed sensor typically costs $100–$300, while other repairs, such as internal transmission fixes, can be more expensive.
8. Can low transmission fluid cause the P0792 code?
Yes, low or contaminated transmission fluid can lead to improper sensor readings and trigger the P0792 code.
9. How do I reset the P0792 code on my 2017 Honda CR-V?
After repairs, use an OBDII scanner to clear the code. However, ensure the issue is fully resolved to prevent the code from returning.
10. Is the intermediate shaft speed sensor hard to replace on a 2017 Honda CR-V?
Replacing the sensor is generally straightforward, but its location on the transmission may require some effort to access. Consult the vehicle's repair manual or a professional mechanic.
Discuss the causes and fixes for P0792 2017 Honda CR-V OBDII Code
Code P0792 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
