AutoCodesToyota – P0791 2011 Toyota Camry

P0791 2011 Toyota Camry Code - Intermediate Shaft Speed Sensor 'A' Circuit

Quick Answer

This sensor detects the rotation speed of the input turbine. Common causes include Faulty Intermediate Shat Speed Sensor 'A', Intermediate Shat Speed Sensor 'A' harness is open or shorted, Intermediate Shat Speed Sensor 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0791 2011 Toyota Camry indicates Intermediate Shaft Speed Sensor 'A' Circuit.
Common causes
Common causes include Faulty Intermediate Shat Speed Sensor 'A', Intermediate Shat Speed Sensor 'A' harness is open or shorted, Intermediate Shat Speed Sensor 'A' circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,583
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 08, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0791 2011 Toyota Camry Description

This sensor detects the rotation speed of the input turbine. By comparing the input turbine speed signal (NT) with the counter gear speed sensor signal (NC), the Engine Control Module (ECM) detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according to various conditions. Thus, providing smooth gear shift.
OBDII Code P0791 2011 Toyota Camry - Intermediate Shaft Speed Sensor 'A' Circuit - AutoCodes.com
P0791 2011 Toyota Camry Code - Intermediate Shaft Speed Sensor 'A' Circuit

What are the Possible Causes of the DTC P0791 2011 Toyota Camry?

  • Faulty Intermediate Shat Speed Sensor 'A'
  • Intermediate Shat Speed Sensor 'A' harness is open or shorted
  • Intermediate Shat Speed Sensor 'A' circuit poor electrical connection

How to Fix the DTC P0791 2011 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0791 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0791 2011 Toyota Camry code?

Need more information on how to fix the P0791 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0791 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0791 2011 Toyota Camry Code

1. What does the OBDII code P0791 mean on a 2011 Toyota Camry?

P0791 indicates an issue with the Intermediate Shaft Speed Sensor 'A' Circuit, which monitors the rotational speed of the intermediate shaft in the transmission.

2. What are the common symptoms of code P0791 in a 2011 Toyota Camry?

Symptoms include delayed or erratic shifting, poor fuel economy, the transmission going into limp mode, and the check engine light being illuminated.

3. What causes the P0791 code to appear in a 2011 Toyota Camry?

Common causes include a faulty intermediate shaft speed sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning transmission control module (TCM), or internal transmission issues.

4. Can I drive my 2011 Toyota Camry with the P0791 code?

Driving with the P0791 code is possible but not recommended, as it can lead to further transmission damage and unsafe driving conditions due to erratic shifting.

5. How can I diagnose the P0791 code in my 2011 Toyota Camry?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and its wiring for damage, testing the sensor with a multimeter, and checking the TCM for faults.

6. How do I fix the P0791 code on a 2011 Toyota Camry?

Repairs may include replacing the intermediate shaft speed sensor, repairing or replacing damaged wiring or connectors, and, if necessary, addressing TCM or internal transmission issues.

7. How much does it cost to fix the P0791 code in a 2011 Toyota Camry?

Costs can vary, but replacing the intermediate shaft speed sensor typically ranges from $150 to $300, including parts and labor. More extensive repairs, such as TCM replacement, may cost more.

8. Can a dirty transmission fluid cause the P0791 code in a 2011 Toyota Camry?

Yes, dirty or low transmission fluid can sometimes affect sensor readings and transmission performance, potentially triggering the P0791 code.

9. Where is the intermediate shaft speed sensor located on a 2011 Toyota Camry?

The intermediate shaft speed sensor is typically located on the transmission housing, near the intermediate shaft or output shaft.

10. Will clearing the P0791 code with a scanner fix the issue in my 2011 Toyota Camry?

Clearing the code may turn off the check engine light temporarily, but it won’t resolve the underlying issue causing the P0791 code. Proper diagnosis and repair are necessary.

Discuss the causes and fixes for P0791 2011 Toyota Camry OBDII Code

Code P0791 2011 Toyota Camry comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play