AutoCodes – Scion – P0788 Scion

P0788 Scion Code - Shift/Timing Solenoid High

Quick Answer

Shift solenoid valve ST is switched ON OFF by a signal from Engine Control Module (ECM) so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0788 Scion indicates Shift/Timing Solenoid High.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,169
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 08, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0788 Scion Description

Shift solenoid valve ST is switched ON OFF by a signal from Engine Control Module (ECM) so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Therefore, shift solenoid valve ST operates when letting in or out reverse clutch.
OBDII Code P0788 Scion - Shift/Timing Solenoid High - AutoCodes.com
P0788 Scion Code - Shift/Timing Solenoid High

What are the Possible Causes of the DTC P0788 Scion?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shifting solenoid valve
  • Shifting solenoid valve harness is open or shorted
  • Shifting solenoid valve circuit poor electrical connection

How to Fix the DTC P0788 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0788 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0788 Scion code?

Need more information on how to fix the P0788 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0788 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0788 Scion Code

1. What does OBDII code P0788 mean for a Scion?

P0788 indicates an issue with the shift/timing solenoid, specifically a high electrical condition in the solenoid circuit.

2. What are the symptoms of code P0788 in a Scion?

Common symptoms include harsh or delayed shifting, transmission slipping, failure to shift gears properly, and the illumination of the check engine light.

3. What causes the P0788 code to trigger in a Scion?

Possible causes include a faulty shift/timing solenoid, damaged wiring or connectors in the solenoid circuit, low or dirty transmission fluid, or a malfunctioning transmission control module (TCM).

4. Can I drive my Scion with a P0788 code?

Driving with this code is not recommended, as it can lead to further transmission damage and unsafe driving conditions due to erratic gear shifting.

5. How do you diagnose a P0788 code in a Scion?

Diagnosis involves scanning for codes with an OBDII scanner, inspecting the wiring and connectors of the shift solenoid circuit, testing the solenoid for proper operation, and checking the transmission fluid condition.

6. How can a P0788 code be fixed in a Scion?

Repairs may include replacing the faulty shift/timing solenoid, repairing or replacing damaged wiring or connectors, performing a transmission fluid flush, or reprogramming or replacing the TCM.

7. How much does it cost to repair a P0788 code in a Scion?

Costs vary depending on the issue but can range from $150 to $400 for solenoid replacement and more if additional repairs or diagnostics are needed.

8. Can low transmission fluid cause a P0788 code in a Scion?

Yes, low or dirty transmission fluid can contribute to solenoid performance issues and trigger this code.

9. What tools are needed to troubleshoot a P0788 code in a Scion?

Basic tools include an OBDII scanner, a multimeter for testing electrical circuits, and potentially a transmission pressure tester.

10. Can a faulty TCM trigger the P0788 code in a Scion?

Yes, a malfunctioning transmission control module can cause improper solenoid operation and set this code.

Discuss the causes and fixes for P0788 Scion OBDII Code

Code P0788 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play