P0783 FORD - 3-4 Shift Error
P0783 FORD Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shifting solenoid valve
- Shifting solenoid valve harness is open or shorted
- Shifting solenoid valve circuit poor electrical connection
How do I fix code P0783 FORD?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the P0783 FORD code
Labor: 1.0The cost of diagnosing the P0783 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?The P0783 code is detected when the engine RPM did not drop during the 3-4 upshift
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission may not shift to the next gear
P0783 FORD DescriptionThis P0783 code indicates that the 3-4 shift valve in the valve body is locked in the direction of the spring compression. The Transmission Control Module (TCM) controls the gearshifts by turning the shift solenoid valves ON/OFF and switching oil pressure to the valves in the valve body. The TCM calculates the actual transmission gear by comparing the signals from the input speed sensor and the output speed sensor.
More InformationNeed more information on how to fix the P0783 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the P0783 Ford code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0783 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks