AutoCodes – Dodge – P0783 Dodge

P0783 Dodge Code - 3-4 Shift Malfunction

Quick Answer

This P0783 code indicates that the 3-4 shift valve in the valve body is locked in the direction of the spring compression. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0783 Dodge indicates 3-4 Shift Malfunction.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,158

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 15, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0783 Dodge Description

This P0783 code indicates that the 3-4 shift valve in the valve body is locked in the direction of the spring compression. The Transmission Control Module (TCM) controls the gearshifts by turning the shift solenoid valves ON/OFF and switching oil pressure to the valves in the valve body. The TCM calculates the actual transmission gear by comparing the signals from the input speed sensor and the output speed sensor. The P0783 code is detected when the actual gear position and the commanded gear position are different.

OBDII Code P0783 Dodge - 3-4 Shift Malfunction - AutoCodes.com — P0783 Dodge Code - 3-4 Shift Malfunction

What does this mean?

What are the Possible Causes of the DTC P0783 Dodge?

Low transmission fluid level
Dirty transmission fluid
Faulty shifting solenoid valve
Shifting solenoid valve harness is open or shorted
Shifting solenoid valve circuit poor electrical connection

How to Fix the DTC P0783 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0783 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0783 Dodge code?

Need more information on how to fix the P0783 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0783 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0783 Dodge Code

No Frequently Asked Questions about P0783 Dodge Code found.

Discuss the causes and fixes for P0783 Dodge OBDII Code

Submit a New Comment

ERNIE
Date: December 10, 2020 at 4:32 pm

IT BEEN REBULIT NO RPM DROP WHEN THE COMMAND IS SEEN ON THE SCARN FOR IT TO LOCK UP.TRANS STAR CONVERTER NEW SOLENOIDS ,CHECK THE PUMP IT HAS 3 BALLS,INSTALL A OTHER VALVE BODY BEFORE DROPING TRANS MISSIO AGAIN DOING THE SAME THING NO LOCK UP.

Reply to Comment