AutoCodesHonda – P0780 Honda

P0780 Honda Code - Shift Control System Fault

Quick Answer

The Transmission Control Module (TCM) monitors the transmission mechanical shifting through various sensors. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0780 Honda indicates Shift Control System Fault.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shifting solenoid valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 174,354
How popular is this code, among other codes? High
Table of contents Created and updated by William Orellana on Jan 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0780 Honda Description

The Transmission Control Module (TCM) monitors the transmission mechanical shifting through various sensors. This malfunction is detected when the A/T does not shift as instructed by the TCM. This is not caused by electrical malfunction (circuits open or shorted) but by mechanical malfunction such as control valve sticking, improper solenoid valve operation, etc. The P0780 code is detected when no rotation change occurs between the input (turbine revolution sensor) and output (revolution sensor), and the shifting time is long or when shifting ends immediately or when the engine revs up unusually during shifting.
OBDII Code P0780 Honda - Shift Control System Fault - AutoCodes.com
P0780 Honda Code - Shift Control System Fault

What are the Possible Causes of the DTC P0780 Honda?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shifting solenoid valve
  • Shifting solenoid valve harness is open or shorted
  • Shifting solenoid valve circuit poor electrical connection

How to Fix the DTC P0780 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0780 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0780 Honda code?

Need more information on how to fix the P0780 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0780 Honda code diagnosed by a professional: Find a repair shop in your area

Information for Specific Honda Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0780 Honda Code

1. What are the common symptoms of OBDII code P0780 in a Honda?

Symptoms may include harsh shifting between gears, delayed shifting, transmission slipping, and the transmission staying in one gear.

2. What can cause the Shift Control System Fault code P0780 in a Honda?

Possible causes include a faulty shift control solenoid, low transmission fluid levels, a malfunctioning transmission valve body, or electrical issues within the transmission system.

3. How serious is the P0780 code in a Honda?

Ignoring the P0780 code can lead to further damage to the transmission, potentially resulting in complete transmission failure. It is important to address this issue promptly to avoid costly repairs.

4. Can I continue driving my Honda with the P0780 code?

It is not recommended to continue driving your Honda with the P0780 code present, as it can cause further damage to the transmission. It is advisable to have the issue diagnosed and repaired as soon as possible.

5. How can I diagnose the Shift Control System Fault code P0780 in my Honda?

Diagnosis typically involves a scan tool to read the OBDII codes, checking the transmission fluid level and condition, and conducting a visual inspection of the transmission components for any visible damage.

6. Is it possible to repair the P0780 code in a Honda myself?

While some DIY enthusiasts may attempt to address this issue, it is recommended to have a professional mechanic diagnose and repair the problem due to the complexity of transmission systems.

7. What is the typical cost to repair the P0780 code in a Honda?

The cost of repairing the P0780 code can vary depending on the exact cause of the issue. It may range from a few hundred dollars for a minor repair to over a thousand dollars for more significant transmission repairs.

8. How long does it take to fix the Shift Control System Fault code P0780 in a Honda?

The repair time can vary based on the extent of the issue and the availability of parts. In general, it may take a few hours to a full day for a mechanic to diagnose and repair the problem.

9. Can a transmission fluid change resolve the P0780 code in a Honda?

In some cases, low or dirty transmission fluid can contribute to the P0780 code. Performing a transmission fluid change and ensuring it is at the correct level may help resolve the issue if the problem is caught early.

10. Will resetting the OBDII code P0780 in my Honda make it go away permanently?

Simply clearing the code without addressing the underlying issue will not fix the problem permanently. The code is likely to return if the root cause, such as a faulty shift control solenoid, is not repaired.

Discuss the causes and fixes for P0780 Honda OBDII Code

  • 2000 Honda Accord p0780. I just my transmission rebuilt less then a day my d4 lights blinking and the check engine light comes on. Should have been fixed while they rebuilt the transmission.

  • Transmission rebuilt was not done properly, you should take it back to the shop.

  • The

  • I took my car back to the shop they'll will fix the transmission and I ask the mechanic why my power steering pump is making a whining sound because it wasn't doing it before. The machanic said that they didn't touch the power steering pump.

  • Check the power steering fluid level. Low level can make the power steering noisy.

  • power steering fluid is filled up to the line.

  • I have 2002 honda accord 2.3L and recently experienced this code after driving through the heart of one of the worst storms Ive seen, local honda dealership claims the interworkings of the trans are still in good shape, good fluid, full and no metal shavings, leading them the believe the water I took on shorted or damaged A/T clutch solenoid A or B, I also started experiencing the whining noise that sounds like power steering but to me it actually sounds like its coming from the trans. How difficult/expensive would it be to repair/replace one or both of the clutch solenoids?

  • You need to remove the transmission pan and valve body in order to access the clutch solenoids for inspection. If possible have a transmission shop inspect the transmission for you. They may be able to inspect the solenoids with special tools without removing the transmission pan.

  • Someone please help me! I just bought a 2002 Acura 3.2 tl about a month ago and the car drove fine for about 2 weeks then it I started having a problem with it taking 3rd and 5th gear! What it does is shifts from 1st to 2nd gear with no problem(no hard shifting or slipping) but when it's at range to shift to the 3rd gear it does like a down shift type of thing(decelerates) and doesn't take 3rd gear then the D5 light starts blinking then engine light and TCS light comes on and it stays in 2nd gear until I turn the ignition off and on while in motion then it goes to 4th gear until it' starts doing the same thing when needing to shift to 5th gear! The obd2 reads a p0780 code stating "failed shift selonoid" What can this be? Idk a thing about transmissions but I'm almost 100% sure it isn't a rebuilding of tranny issue as it doesn't slip or shift gears "hard"... someone please help me, I don't have 1,200 bucks for a tranny rebuild job

  • Start by inspecting the transmission fluid level and condition. Change fluid if necessary. If the fluid it's OK and you still have the problem, you may have to have a transmission shop inspect the vehicle for you. It doesn't mean you have to rebuild the transmission, but you may have to replace the shifting solenoids.

  • Sorry, many typos in my last comment. *This code came up in my 2002 Acura 3.2 TL. It actually came up for me as well after driving in a storm. I'm now having problems when I put the gear in reverse, there's lots of slipping, almost like I'm in neutral. It also jumps from 4th to 5th, it's not a smooth transition at all. Help? I don't have much money and try to do as much as I can on my own.

  • Start by inspecting the transmission fluid level and condition. Change fluid if necessary. If the fluid it's OK and you still have the problem, you may have to have a transmission shop inspect the vehicle for you. Unfortunately there might be a problem with the solenoid.

  • This code recently popped up on my 2001 honda accord and when I drive it jerks .

  • You should start by inspecting the transmission fluid level and condition. When was the last time you change the transmission fluid? if the fluid is OK, then you may have to replace the shifting solenoid valve.

  • Where about would the solenoid on this trans would be located 2001 honda accord ex v6

  • The shift solenoid is on top of the transmission. Here is the only image I got.

    Image

    Click here to enlarge image

  • Just drive the vehicle,the winning noise will cease after a few drive cycles.

  • I JUST GOT MY ODYSSEY 04' ..SCANNED AT AUTOZONE .THEY GAVE ME THE CODES 720 730 740 AND 780..SOMEBODY CAN TELL ME IF I NEED TO REPLACEMENT NEW OR. USED? ..

  • Do you any driveability problems? can you clear the codes?

    I suggest starting by checking the transmission fluid level and condition. Make sure the level is OK, then clear the codes and drive. If the light comes back with all the codes, then you may have to have a transmission shop check the transmission for you.

  • I CHANGED THE TRANSMISSION FLUID..FILTER AND. ONE OF THE SOLENOIDS..I DID CLEAN UP THE OTHER. SOLENOIDS. .STILL. CAN DRIVE LIKE 3 MILES OK..AFTER THAT START LIKE WANT TO STALL. .

  • HI, my V6 2000 Accord have the same code. Driving no issue except when it come to a sudden stop (not frequently happened), it D light on Dashboard flashing. As this occur i often pull over and restart the engine. Driving fine. Although I could have keep driving. it just bother me seeing flashing light. Could you suggest what kinda repair do i need to be done before bring it to the mechanic. Transmission fluid, was filled up very recently. Thank you

  • The most likely cause of the problem is shifting solenoid valve, and that is something you probably can't do at home, you have to have your mechanic change the solenoid valve.

  • I recommend starting by changing the transmission fluid, it's part of the maintenance anyway. If the problem persists you could replace the shifting solenoids, but due to the age of your vehicle, it may be necessary to rebuild or replace the transmission assembly.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play