P0778 Scion Code - Pressure Control Solenoid 'B' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0778 Scion indicates Pressure Control Solenoid 'B' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0778 Scion Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL2 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any of the shift solenoid valve circuits, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting gears, if the ECM detects an open or short in the shift solenoid valve SL2 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0778 Scion?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2)
- Pressure Control Solenoid 'B' valve harness is open or shorted
- Pressure Control Solenoid 'B' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0778 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0778 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0778 Scion code?
Need more information on how to fix the P0778 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0778 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0778 Scion Code
What does the OBDII code P0778 mean for a Scion?
P0778 indicates an issue with the Pressure Control Solenoid 'B' circuit, often related to electrical problems or solenoid malfunction in the transmission.
What are the common symptoms of P0778 in a Scion?
Symptoms may include transmission slipping, harsh shifting, poor acceleration, or the vehicle going into limp mode.
What causes the P0778 code to be triggered?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid, or issues with the transmission control module (TCM).
How can I diagnose the P0778 code on my Scion?
Start by checking the transmission fluid level and condition, inspecting wiring and connectors for damage, and testing the pressure control solenoid for proper operation.
Can driving with the P0778 code harm my Scion's transmission?
Yes, ignoring this code can lead to further transmission damage, reduced performance, and potential safety issues.
How much does it cost to repair the P0778 code on a Scion?
Repair costs can vary but typically range from $200 to $600 depending on whether the solenoid, wiring, or TCM needs replacement.
Can I fix the P0778 code myself?
If you have experience with automotive repairs, you can check the wiring, connectors, and replace the solenoid if necessary. Otherwise, it's best to consult a professional.
Does the P0778 code always mean the solenoid is bad?
Not necessarily. The code can also result from electrical issues like damaged wiring or a malfunctioning TCM.
What tools do I need to troubleshoot the P0778 code?
You’ll need an OBDII scanner, a multimeter for testing electrical circuits, and basic automotive tools for inspecting and replacing components.
How do I prevent the P0778 code from appearing again?
Regular transmission maintenance, including fluid changes and inspections, can help prevent issues like solenoid failure or electrical problems.
Discuss the causes and fixes for P0778 Scion OBDII Code
Code P0778 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
