P0776 2016 Toyota RAV4 Code - Pressure Control Solenoid 'B' Performance
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0776 2016 Toyota RAV4 indicates Pressure Control Solenoid 'B' Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0776 2016 Toyota RAV4 Description
The ECM commands gear shifts by turning the shift solenoid valves on and off. According to the input shaft speed, intermediate (counter) shaft speed, and output shaft speed, the ECM detects the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). When the gear commanded by the ECM and the actual gear are not the same, the ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0776 2016 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2)
- Pressure Control Solenoid 'B' valve harness is open or shorted
- Pressure Control Solenoid 'B' valve circuit poor electrical connection
- Transmission valve body assembly is blocked
- Faulty Automatic transaxle assembly
How to Fix the DTC P0776 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0776 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0776 2016 Toyota RAV4 code?
Need more information on how to fix the P0776 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0776 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0776 2016 Toyota RAV4 Code
1. What does the OBDII code P0776 mean for a 2016 Toyota RAV4?
P0776 indicates a performance issue with Pressure Control Solenoid 'B' in the transmission, which regulates hydraulic pressure for shifting gears.
2. What are the common symptoms of code P0776 in a 2016 Toyota RAV4?
Symptoms may include harsh or delayed shifting, transmission slipping, poor fuel efficiency, or the vehicle going into limp mode.
3. What causes the P0776 code to appear in a 2016 Toyota RAV4?
Common causes include a faulty pressure control solenoid, low or dirty transmission fluid, internal transmission issues, or wiring and connection problems.
4. Can I drive my 2016 Toyota RAV4 with the P0776 code?
Driving with this code is not recommended as it could lead to further transmission damage or unsafe driving conditions.
5. How do I diagnose the P0776 code on a 2016 Toyota RAV4?
Diagnosis involves checking the transmission fluid condition, inspecting the solenoid and related wiring, and performing a pressure test or using a scan tool to monitor solenoid performance.
6. How much does it cost to repair the P0776 code on a 2016 Toyota RAV4?
Depending on the issue, repair costs can range from $150 to $400 for solenoid replacement or higher if transmission repairs are needed.
7. Can dirty transmission fluid cause the P0776 code on a 2016 Toyota RAV4?
Yes, dirty or contaminated transmission fluid can restrict solenoid operation and trigger this code.
8. How do I fix the P0776 code on my 2016 Toyota RAV4?
Repairs may involve replacing the pressure control solenoid, performing a transmission fluid flush, repairing wiring, or addressing internal transmission damage.
9. What tools are needed to fix the P0776 code on a 2016 Toyota RAV4?
Common tools include a diagnostic scan tool, a multimeter, and basic hand tools for solenoid or wiring repairs.
10. Will resetting the code clear the P0776 issue on a 2016 Toyota RAV4?
Resetting the code may temporarily clear it, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0776 2016 Toyota RAV4 OBDII Code
Code P0776 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
