AutoCodes – Toyota – P0776 2015 Toyota RAV4

P0776 2015 Toyota RAV4 Code - Pressure Control Solenoid 'B' Performance

Quick Answer

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0776 2015 Toyota RAV4 indicates Pressure Control Solenoid 'B' Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 513

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 11, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0776 2015 Toyota RAV4 Description

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated.
The ECM commands gear shifts by turning the shift solenoid valves on and off. According to the input shaft speed, intermediate (counter) shaft speed, and output shaft speed, the ECM detects the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). When the gear commanded by the ECM and the actual gear are not the same, the ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).

OBDII Code P0776 2015 Toyota RAV4 - Pressure Control Solenoid 'B' Performance - AutoCodes.com — P0776 2015 Toyota RAV4 Code - Pressure Control Solenoid 'B' Performance

What does this mean?

What are the Possible Causes of the DTC P0776 2015 Toyota RAV4?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2)
Pressure Control Solenoid 'B' valve harness is open or shorted
Pressure Control Solenoid 'B' valve circuit poor electrical connection
Transmission valve body assembly is blocked
Faulty Automatic transaxle assembly

How to Fix the DTC P0776 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0776 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0776 2015 Toyota RAV4 code?

Need more information on how to fix the P0776 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0776 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0776 2015 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0776 in a 2015 Toyota RAV4?

The common symptoms of OBDII code P0776 in a 2015 Toyota RAV4 may include harsh shifting, transmission slipping, reduced fuel efficiency, and the illumination of the Check Engine Light.

2. What does OBDII code P0776 on a 2015 Toyota RAV4 indicate?

OBDII code P0776 on a 2015 Toyota RAV4 indicates a fault with the Pressure Control Solenoid 'B', signaling a performance issue within the transmission control system.

3. What are the possible causes of OBDII code P0776 in a 2015 Toyota RAV4?

The possible causes of OBDII code P0776 in a 2015 Toyota RAV4 can include a faulty pressure control solenoid 'B', low transmission fluid levels, a clogged transmission filter, or wiring/connectivity issues.

4. How can I diagnose the OBDII code P0776 in my 2015 Toyota RAV4?

Diagnosing OBDII code P0776 in a 2015 Toyota RAV4 involves conducting a thorough inspection of the transmission system, checking the transmission fluid levels and condition, testing the pressure control solenoid 'B', and scanning for any related trouble codes.

5. Can I continue driving my 2015 Toyota RAV4 with OBDII code P0776?

It is not recommended to continue driving your 2015 Toyota RAV4 with OBDII code P0776, as it can lead to further damage to the transmission system. It is best to address the issue promptly to avoid costly repairs.

6. How can I repair OBDII code P0776 in my 2015 Toyota RAV4?

Repairing OBDII code P0776 in a 2015 Toyota RAV4 typically involves replacing the pressure control solenoid 'B', checking and replenishing transmission fluid, inspecting the transmission filter, and ensuring proper wiring connections.

7. Is it possible to reset OBDII code P0776 in a 2015 Toyota RAV4 without fixing the underlying issue?

Resetting OBDII code P0776 in a 2015 Toyota RAV4 without fixing the underlying issue will only temporarily clear the code. The Check Engine Light is likely to reappear once the vehicle's system detects the persisting problem.

8. How much does it cost to repair OBDII code P0776 in a 2015 Toyota RAV4?

The cost of repairing OBDII code P0776 in a 2015 Toyota RAV4 can vary depending on the specific underlying issue, labor costs, and parts required. It is recommended to consult a professional mechanic for an accurate estimate.

9. Are there any preventive maintenance tips to avoid OBDII code P0776 in a 2015 Toyota RAV4?

To prevent OBDII code P0776 in a 2015 Toyota RAV4, it is advisable to maintain regular transmission fluid checks and changes, address any transmission issues promptly, and follow the manufacturer's recommended maintenance schedule.

10. Can a DIY enthusiast repair OBDII code P0776 in a 2015 Toyota RAV4?

While some aspects of diagnosing and repairing OBDII code P0776 in a 2015 Toyota RAV4 may be tackled by a DIY enthusiast, dealing with the transmission system and pressure control solenoid 'B' often requires specialized tools and expertise best left to professional mechanics.