AutoCodesGeneric – P076E

P076E Code - Shift Solenoid 'H' Intermittent

Quick Answer

Shift solenoid valve 'H' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'H' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P076E indicates Shift Solenoid 'H' Intermittent.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'H' valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,530
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 08, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P076E Description

Shift solenoid valve 'H' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
OBDII Code P076E - Shift Solenoid 'H' Intermittent - AutoCodes.com
P076E Code - Shift Solenoid 'H' Intermittent

What are the Possible Causes of the DTC P076E?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid 'H' valve
  • Shift solenoid 'H' valve harness or connectors
  • Shift solenoid 'H' valve circuit is open or shorted

How to Fix the DTC P076E?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P076E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P076E code?

Need more information on how to fix the P076E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P076E code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P076E Code

1. What does the OBDII code P076E mean?

P076E indicates an intermittent issue with shift solenoid 'H,' which is responsible for controlling gear shifts in an automatic transmission.

2. What are common symptoms of code P076E?

Symptoms may include erratic shifting, transmission slipping, delayed gear engagement, poor fuel efficiency, or the transmission being stuck in one gear.

3. What causes the P076E code to appear?

Common causes include a faulty shift solenoid 'H,' wiring or connector issues, contaminated transmission fluid, or a malfunctioning transmission control module (TCM).

4. Can I drive with the P076E code?

Driving is possible but not recommended, as it can lead to further damage to the transmission and unsafe driving conditions due to erratic shifting.

5. How do I diagnose a P076E code?

Start by inspecting the transmission fluid, wiring, and connectors for damage or corrosion. Use a scan tool to monitor solenoid operation and test the solenoid's resistance.

6. How is the P076E code typically repaired?

Repairs may involve replacing the shift solenoid 'H,' repairing or replacing damaged wiring or connectors, flushing and replacing the transmission fluid, or updating/reprogramming the TCM.

7. What tools are needed to fix a P076E code?

You’ll need a diagnostic scan tool, a multimeter for electrical testing, and possibly basic tools for removing and replacing the solenoid or wiring.

8. How much does it cost to fix the P076E code?

Repair costs can range from $200 to $500 for solenoid replacement, but prices may vary depending on labor rates and the extent of the issue.

9. Can low transmission fluid cause the P076E code?

Yes, low or contaminated transmission fluid can interfere with solenoid operation and trigger the P076E code.

10. Does the P076E code always mean the solenoid is bad?

Not necessarily. It could be caused by wiring issues, a malfunctioning TCM, or other transmission-related problems. Proper diagnosis is essential.

Discuss the causes and fixes for P076E OBDII Code

Code P076E comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play