P0763 Acura Code - Shift Solenoid 'C' Circuit Fault
Quick Answer
Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0763 Acura indicates Shift Solenoid 'C' Circuit Fault.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0763 Acura Description
What are the Possible Causes of the DTC P0763 Acura?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'C' valve
- Shift solenoid 'C' valve harness or connectors
- Shift solenoid 'C' valve circuit is open or shorted
How to Fix the DTC P0763 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0763 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0763 Acura code?
Need more information on how to fix the P0763 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0763 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0763 Acura Code
No Frequently Asked Questions about P0763 Acura Code found.
Discuss the causes and fixes for P0763 Acura OBDII Code
-
my 2001 acura mdx shows engine light on dashboard so i diagnosed it and it says p0763 on the scan tool. so i changed the solenoid shifter c which is the code showing in the scan tool that has a problem and i changed also the transmission filter and trans fluid.when i drive it works fine and after few kilometers engine light shows again and 1st gear was slipping and u need to rev the acceleration first before car starts moving..any help pls!
-
How is the transmission fluid level? Did you notice any debris on the transmission pan?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
