AutoCodesAudi – P0761 Audi

P0761 Audi Code - Shift Solenoid 'C' Performance or Stuck Off

Quick Answer

Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0761 Audi indicates Shift Solenoid 'C' Performance or Stuck Off.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,077
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0761 Audi Description

Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
OBDII Code P0761 Audi - Shift Solenoid 'C' Performance or Stuck Off - AutoCodes.com
P0761 Audi Code - Shift Solenoid 'C' Performance or Stuck Off

What are the Possible Causes of the DTC P0761 Audi?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid 'C' valve
  • Shift solenoid 'C' valve harness or connectors
  • Shift solenoid 'C' valve circuit is open or shorted

How to Fix the DTC P0761 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0761 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0761 Audi code?

Need more information on how to fix the P0761 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0761 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0761 Audi Code

What does the OBDII code P0761 mean for an Audi?

Code P0761 indicates a problem with Shift Solenoid 'C,' which may be stuck off or not performing as intended, leading to transmission issues.

What are common symptoms of code P0761 in an Audi?

Symptoms include harsh or delayed shifting, transmission slipping, poor fuel efficiency, and possibly the transmission being stuck in one gear.

What causes the P0761 code in an Audi?

Common causes include a faulty shift solenoid, dirty or low transmission fluid, wiring or connector issues, or internal transmission problems like a damaged valve body.

Can driving with a P0761 code damage my Audi?

Yes, driving with this code can cause further damage to the transmission, so it’s best to address the issue promptly.

How can I diagnose the P0761 code in an Audi?

Diagnosis involves checking the transmission fluid level and condition, inspecting wiring and connectors, testing the shift solenoid, and scanning for related codes.

How do I fix code P0761 in an Audi?

Repairs may include replacing the shift solenoid, cleaning or refilling transmission fluid, repairing wiring or connectors, or addressing internal transmission issues.

How much does it cost to repair code P0761 on an Audi?

Costs vary depending on the issue but can range from $150-$400 for solenoid replacement to $1,000+ if internal transmission repairs are needed.

Can a dirty transmission fluid cause code P0761?

Yes, dirty or contaminated transmission fluid can affect solenoid performance and lead to the P0761 code.

Should I reset the code P0761 without fixing the problem?

No, resetting the code without addressing the underlying issue can lead to recurring problems and further transmission damage.

Is it possible to prevent the P0761 code in an Audi?

Regular maintenance, such as changing transmission fluid and inspecting wiring, can help prevent solenoid-related issues like P0761.

Discuss the causes and fixes for P0761 Audi OBDII Code

Code P0761 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play