P0761 2018 GMC Sierra Code - Shift Solenoid Valve 3 Performance Stuck Off
Quick Answer
The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0761 2018 GMC Sierra indicates Shift Solenoid Valve 3 Performance Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0761 2018 GMC Sierra Description
What are the Possible Causes of the DTC P0761 2018 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0761 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0761 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0761 2018 GMC Sierra code?
Need more information on how to fix the P0761 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0761 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0761 2018 GMC Sierra Code
1. What does the OBDII code P0761 mean for a 2018 GMC Sierra?
P0761 indicates a performance issue with Shift Solenoid Valve 3, specifically that it is stuck in the "off" position, affecting gear shifting.
2. What are the common symptoms of code P0761 on a 2018 GMC Sierra?
Symptoms may include difficulty shifting gears, delayed or harsh shifting, transmission slipping, and illumination of the check engine light.
3. What causes the P0761 code on a 2018 GMC Sierra?
Common causes include a faulty shift solenoid valve, transmission fluid issues (low or dirty), electrical problems like damaged wiring or connectors, or internal transmission damage.
4. Can driving with code P0761 damage my 2018 GMC Sierra?
Yes, driving with this code can lead to further transmission damage and decreased vehicle performance if not addressed promptly.
5. How do I diagnose code P0761 on a 2018 GMC Sierra?
Diagnose by using an OBDII scanner, inspecting the shift solenoid valve, checking the transmission fluid level and condition, and examining wiring and connectors for damage.
6. How do you fix code P0761 on a 2018 GMC Sierra?
Repairs may include replacing the faulty shift solenoid valve, flushing or replacing transmission fluid, repairing damaged wiring or connectors, or addressing internal transmission issues.
7. How much does it cost to repair code P0761 on a 2018 GMC Sierra?
Repair costs vary but typically range from $200 to $500 for solenoid replacement, with higher costs if transmission repairs are needed.
8. Can dirty transmission fluid cause code P0761 on a 2018 GMC Sierra?
Yes, dirty or contaminated transmission fluid can impede solenoid operation and trigger this code.
9. Is code P0761 specific to the 2018 GMC Sierra?
No, P0761 is a generic OBDII code that can appear on various vehicles, but the specific diagnostics and repairs depend on the vehicle make and model.
10. Can a software update resolve code P0761 on a 2018 GMC Sierra?
In rare cases, a transmission control module (TCM) software update may help, but most issues require mechanical or electrical repairs.
Discuss the causes and fixes for P0761 2018 GMC Sierra OBDII Code
Code P0761 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
