P0761 2015 GMC Sierra Code - Shift Solenoid Valve 3 Performance Stuck Off
Quick Answer
The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0761 2015 GMC Sierra indicates Shift Solenoid Valve 3 Performance Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0761 2015 GMC Sierra Description
What are the Possible Causes of the DTC P0761 2015 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0761 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0761 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0761 2015 GMC Sierra code?
Need more information on how to fix the P0761 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0761 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0761 2015 GMC Sierra Code
What does the OBDII code P0761 mean on a 2015 GMC Sierra?
1. P0761 indicates a problem with Shift Solenoid Valve 3, specifically that it is stuck in the "off" position or not functioning as expected. 2.
What are the common symptoms of code P0761 in a 2015 GMC Sierra?
Symptoms may include difficulty shifting gears, slipping transmission, poor fuel efficiency, harsh shifting, or the Check Engine Light being illuminated. 3.
What causes code P0761 on a 2015 GMC Sierra?
Common causes include a faulty shift solenoid, low or dirty transmission fluid, damaged wiring or connectors, or internal transmission issues. 4.
Can I drive my 2015 GMC Sierra with code P0761?
Driving with this code is not recommended as it can lead to further damage to the transmission and unsafe driving conditions. 5.
How do I diagnose code P0761 on a 2015 GMC Sierra?
Start by checking the transmission fluid level and condition, inspecting wiring and connectors for damage, and using a scan tool to monitor solenoid performance. 6.
How much does it cost to fix code P0761 on a 2015 GMC Sierra?
Repair costs vary but may range from $150 to $400 for solenoid replacement, with higher costs if significant transmission repairs are required. 7.
Can dirty transmission fluid cause code P0761 on a 2015 GMC Sierra?
Yes, dirty or low transmission fluid can prevent the solenoid from functioning correctly, leading to this code. 8.
How do I reset the P0761 code on my 2015 GMC Sierra?
The code can be cleared with an OBDII scanner after repairs, but it may return if the underlying issue is not resolved. 9.
What tools are needed to fix the P0761 code on a 2015 GMC Sierra?
Basic tools include an OBDII scanner, multimeter for electrical testing, and potentially transmission-specific tools for solenoid replacement. 10.
Is replacing the shift solenoid the only fix for code P0761 on a 2015 GMC Sierra?
No, the issue could also be caused by wiring problems, fluid issues, or mechanical transmission failures, so proper diagnosis is essential.
Discuss the causes and fixes for P0761 2015 GMC Sierra OBDII Code
Code P0761 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
