P0761 2014 Chevrolet Silverado Code - Shift Solenoid Valve 3 Performance Stuck Off
Quick Answer
The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0761 2014 Chevrolet Silverado indicates Shift Solenoid Valve 3 Performance Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0761 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0761 2014 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0761 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0761 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0761 2014 Chevrolet Silverado code?
Need more information on how to fix the P0761 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0761 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0761 2014 Chevrolet Silverado Code
1. What does the OBDII code P0761 mean for a 2014 Chevrolet Silverado?
P0761 indicates that the Shift Solenoid Valve 3 is experiencing performance issues or is stuck off, affecting proper gear shifting.
2. What are common symptoms of code P0761 in a 2014 Chevrolet Silverado?
Symptoms may include harsh shifting, delayed gear engagement, transmission slipping, or the vehicle being stuck in a single gear.
3. What can cause code P0761 in a 2014 Chevrolet Silverado?
Common causes include a faulty shift solenoid, low transmission fluid levels, contaminated fluid, wiring issues, or a failing transmission control module (TCM).
4. How can I check if the shift solenoid is the issue for code P0761?
You can test the solenoid using a multimeter to check its resistance or perform a bench test to verify its operation.
5. Can low transmission fluid cause code P0761?
Yes, low or dirty transmission fluid can lead to inadequate hydraulic pressure, causing the shift solenoid to malfunction.
6. Is it safe to drive my 2014 Chevrolet Silverado with code P0761?
Driving with this code can cause further damage to the transmission and lead to unsafe driving conditions, so it’s best to address the issue promptly.
7. How do I fix code P0761 in my 2014 Chevrolet Silverado?
Repairs may involve replacing the shift solenoid, flushing and refilling transmission fluid, repairing damaged wiring, or reprogramming the TCM.
8. How much does it cost to repair code P0761 on a 2014 Chevrolet Silverado?
Repair costs vary but may range from $200 to $600 depending on whether the solenoid, wiring, or fluid needs attention.
9. Can a faulty transmission control module cause code P0761?
Yes, a malfunctioning TCM can fail to send proper signals to the solenoid, leading to this error code.
10. How can I prevent code P0761 from occurring again?
Regular transmission fluid checks, timely maintenance, and addressing wiring issues promptly can help prevent this code from reappearing.
Discuss the causes and fixes for P0761 2014 Chevrolet Silverado OBDII Code
Code P0761 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
