P0760 NISSAN - Shift Solenoid Valve 'C' Malfunction
P0760 NISSAN Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'C' valve
- Shift solenoid 'C' valve harness or connectors
- Shift solenoid 'C' valve circuit is open or shorted
How do I fix code P0760 NISSAN?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0760 NISSAN code
Labor: 1.0The cost of diagnosing the P0760 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?The P0760 code is detected when the TCM detects an improper voltage drop when it tries to operate the solenoid valve.
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0760 NISSAN DescriptionShift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
More InformationNeed more information on how to fix the P0760 NISSAN code?
Get Access to Factory Service Manuals
Information for specific Nissan models
Need more help?Get the P0760 Nissan code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0760 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks