AutoCodes – Jeep – P0760 Jeep

P0760 Jeep Code - OD Solenoid Circuit Fault

Quick Answer

Over Drive (OD) solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty OD shift solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0760 Jeep indicates OD Solenoid Circuit Fault.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty OD shift solenoid valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,377

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 01, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0760 Jeep Description

Over Drive (OD) solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position. The Diagnostic Trouble Code (DTC) will set when the TCM has detected a fault in the OD Solenoid circuit

OBDII Code P0760 Jeep - OD Solenoid Circuit Fault - AutoCodes.com — P0760 Jeep Code - OD Solenoid Circuit Fault

What does this mean?

What are the Possible Causes of the DTC P0760 Jeep?

Low transmission fluid level
Dirty transmission fluid
Faulty OD shift solenoid valve
OD solenoid valve harness is open or shorted
OD solenoid valve circuit poor electrical connection

How to Fix the DTC P0760 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the following Jeep models:
2003-2005 Jeep Wrangler
2003-2005 Jeep Liberty
2003-2005 Jeep Cherokee
Jeep Factory Service Bulletin OBDII Code P0760

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0760 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0760 Jeep code?

Need more information on how to fix the P0760 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0760 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0760 Jeep Code

1. What are the common symptoms of OBDII code P0760 in a Jeep?

- Common symptoms include harsh shifting, transmission slipping, and failure to shift gears properly.

2. What does the OBDII code P0760 in a Jeep indicate?

- This code indicates a fault in the OD (overdrive) solenoid circuit within the transmission.

3. What are the possible causes of the OD solenoid circuit fault in a Jeep?

- Possible causes include a faulty OD solenoid, damaged wiring or connectors, low transmission fluid levels, or a defective transmission control module (TCM).

4. How can I diagnose the OD solenoid circuit fault in my Jeep?

- Diagnosis typically involves using a scan tool to retrieve the OBDII code, checking the transmission fluid level and condition, and inspecting the wiring and connectors for any damage.

5. Can I continue driving my Jeep with OBDII code P0760?

- It is not recommended to continue driving with this code as it can lead to further transmission damage and potential safety hazards.

6. How can I repair the OD solenoid circuit fault in my Jeep?

- Repair involves replacing the faulty OD solenoid, repairing any damaged wiring or connectors, ensuring proper transmission fluid levels, and potentially reprogramming the TCM.

7. Is it possible to clear the OBDII code P0760 without repairing the issue?

- Clearing the code without addressing the underlying problem will likely result in the code reappearing once the issue is detected again by the vehicle's system.

8. Can a DIY enthusiast fix the OD solenoid circuit fault in a Jeep?

- While some experienced DIY enthusiasts may be able to replace the OD solenoid or repair wiring, diagnosing and repairing transmission issues often require specialized tools and expertise best handled by a professional mechanic.

9. How much does it typically cost to repair the OD solenoid circuit fault in a Jeep?

- Costs can vary depending on the specific issue and the shop rates in your area, but expect to pay for parts and labor, which could range from a few hundred to over a thousand dollars.

10. How can I prevent OBDII code P0760 from occurring in the future?

- Regular maintenance of the transmission, including checking and changing the fluid as recommended by the manufacturer, can help prevent issues like the OD solenoid circuit fault.