P0760 Hyundai Code - Shift Control Solenoid 'C' Malfunction
Quick Answer
The Automatic Transmission changes the gear position of the transmission by utilizing a combination of Clutches and Brakes, which are controlled by solenoid valves. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Control Solenoid 'C' Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0760 Hyundai indicates Shift Control Solenoid 'C' Malfunction.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Control Solenoid 'C' Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0760 Hyundai Description
The Transmission Control Module (TCM) checks the Shift Control Solenoid Valve C control signal by monitoring the feedback signal from the solenoid valve drive circuit. If an unexpected signal is monitored, (For example, high voltage is detected when low voltage is expected or low voltage is detected when high voltage is expected) the TCM judges that SCSV C control solenoid circuit is malfunctioning and sets this code.
What are the Possible Causes of the DTC P0760 Hyundai?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Control Solenoid 'C' Valve
- Shift Control Solenoid 'C' Valve harness or connectors
- Shift Control Solenoid 'C' Valve circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0760 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0760 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0760 Hyundai code?
Need more information on how to fix the P0760 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0760 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0760 Hyundai Code
1. What does the OBDII code P0760 mean for a Hyundai?
The code P0760 indicates a malfunction in the shift control solenoid 'C,' which is responsible for controlling gear shifts in the transmission.
2. What are the common symptoms of code P0760 in a Hyundai?
Symptoms include delayed or erratic shifting, transmission slipping, reduced fuel efficiency, or the vehicle being stuck in one gear.
3. What causes the P0760 code to appear?
Common causes include a faulty shift solenoid 'C,' damaged wiring or connectors, low or dirty transmission fluid, or issues with the transmission control module (TCM).
4. How can I diagnose the P0760 code in a Hyundai?
Start by inspecting the wiring and connectors, checking the transmission fluid condition and level, and testing the shift solenoid 'C' for proper operation using a multimeter.
5. Can driving with the P0760 code damage my Hyundai's transmission?
Yes, driving with this code can lead to further transmission damage and reduced performance if not addressed promptly.
6. How do I fix the P0760 code on a Hyundai?
Repairs may involve replacing the shift solenoid 'C,' repairing or replacing damaged wiring or connectors, flushing and refilling transmission fluid, or updating/replacing the transmission control module.
7. How much does it cost to repair the P0760 code on a Hyundai?
Repair costs can vary widely, typically ranging from $200 to $600 for solenoid replacement, with additional costs for diagnostics or other needed repairs.
8. Is the P0760 code specific to Hyundai vehicles?
No, the P0760 code is a generic OBDII code that can appear in various vehicles, but the diagnosis and repair process may vary depending on the make and model.
9. Can low transmission fluid cause the P0760 code in a Hyundai?
Yes, low or dirty transmission fluid can prevent the shift solenoid 'C' from functioning properly, triggering the code.
10. Do I need specialized tools to fix the P0760 code in a Hyundai?
Basic tools like a multimeter and OBDII scanner are sufficient for diagnostics, but more advanced tools may be needed for solenoid replacement or transmission work.
Discuss the causes and fixes for P0760 Hyundai OBDII Code
-
Could you please elaborate more your question.
Shift Solenoids inside the transmission.
-
hi there. i have 2007 hyundai elantra. when i scan it it shows the codes p0700 and p0760. the symptoms are gearing is weird. moving from stop is very slow , much slower than normal, engine light on. the transmission mechanic said that it is the car moving only in 3rd gear. he replaced solenoid but after driving like 10 miles the car had a hiccup and shake and it returned the old position. what is the cure for it?
-
hi there. I'm having the same problem on my 2007 elantra with the same codes po700 and po760. did u ever find the problem.
-
P0700 code only means that there is a problem with the transmission. P0760 code means that there is a problem with the shifting solenoid, may have a bad solenoid or debris inside the transmission is causing the solenoid to stick. Due to the age of you Hyundai, its possible that what is causing the problem is debris inside the transmission, which could be caused by worn out parts. My recommendation is rebuild the transmission
-
I'm having the same problem on my elantra 2008 elantra with the code p0760. did u ever find the problem in the solenoid valve or the connectors and which one of connectors.
-
I also have a problem with my 2007 hyundai elantra and the code P0760. The transmission fluid is brown. Will replacing the transmission fluid do anything for this?
-
Low or dirty fluid could cause the solenoid valve to fail, but it depends on how low and dirty is fluid. Changing the fluid is the least expensive repair, and since part of regular maintenance is worth to try.
-
I have a 2007 Hyundai Elantra. My engine light went on and I got it coded as a P0760, took it to a transmission shop. He drained it, said it was very dirty, not many bits on the bottom of the transmission. He flushed it out twice and put new T oil in, It ran well for two weeks and the light went on again. Does this mean I might have to get a rebuild? Or, maybe something else can be done. I won't spend a lot of money fixing the problem. It being a 2007 with +140K miles, it might be better to find another car? Please advise a possible solution. Thank you.
-
Do you have any other symptoms?
Does this mean I might have to get a rebuild?
You could try replacing just the transmission solenoids (Around $300-$400) or the valve body ($600-$800), but due to the age of your vehicle, some mechanical parts may be worn out as well. -
I have a 2011 Hyundai Accent- now works up to 47,000km . My engine light went on and I got it coded's as a P0760, B2500 and took it to a transmission shop. Does this mean I might have to get a rebuild? Or, maybe something else can be done. Please advise a possible solution. Thank you.
-
The B2500 has nothing to do with the transmission problem:
B2500 HYUNDAI - Air Bag Warning Lamp
Read more: https://www.autocodes.com/b...The P0760 means that the "Shift Control Solenoid C" is not working properly. You could try replacing just the Shift Control Solenoid C, which is attached to the transmission Valve Body inside the transmission. When removing the parts, the transmission shop can inspect other transmission components and determine if the transmission needs to be rebuild.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
