P0760 Ford Code - Shift Solenoid 3 Circuit
Quick Answer
Shift solenoid valve 3 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty 3 Shift Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0760 Ford indicates Shift Solenoid 3 Circuit.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty 3 Shift Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0760 Ford Description
What are the Possible Causes of the DTC P0760 Ford?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 3 Shift Solenoid Valve
- 3 Shift Solenoid Valve harness or connectors
- 3 Shift Solenoid Valve circuit is open or shorted
How to Fix the DTC P0760 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0760 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0760 Ford code?
Need more information on how to fix the P0760 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0760 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0760 Ford Code
No Frequently Asked Questions about P0760 Ford Code found.
Discuss the causes and fixes for P0760 Ford OBDII Code
-
my 2000 ford ranger works in reverse but stalls when i put it into drive
-
Start by checking the transmission fluid level and condition. Top off fluid if necessary. If the problem persist, you could either try changing the fluid first or taking you Ford to a transmission shop for further inspection.
-
Hello, my 1997 ford escort is coming up with P0760 code. Where exactly is the location of Shift solenoid c on the gear box. Thanks.
-
Unfortunately I don't have an image of the solenoids, but you may not be able to replace just one solenoid, you may have to replace the solenoid pack, which is attached to the transmission valve body inside the transmission. Also, you may considering replacing the transmission filter and fluid first, before replacing the solenoid. Sometimes the problem is just the filter.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
