P0757 Buick Code - Shift Solenoid Valve 2 Performance Stuck On
Quick Answer
The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0757 Buick indicates Shift Solenoid Valve 2 Performance Stuck On.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0757 Buick Description
What are the Possible Causes of the DTC P0757 Buick?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0757 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2001-2005 Buick LeSabre
2001-2005 Buick Park Avenue
2002-2007 Buick Rendezvous
2002-2007 Buick Rendezvous AWD
2005-2007 Buick Terraza
2005-2007 Buick Terraza EXT
2005-2007 Buick Terraza 4WD
2005-2008 Buick Allure (Canada Only)
2005-2008 Buick LaCrosse
2006-2008 Buick Lucerne
Buick Factory Service Bulletin OBDII Code P0757
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0757 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0757 Buick code?
Need more information on how to fix the P0757 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0757 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0757 Buick Code
1. What are the common symptoms of OBDII code P0757 in a Buick related to the Shift Solenoid Valve 2 Performance Stuck On?
The common symptoms include harsh shifting, delayed or erratic shifting, transmission slippage, and the vehicle may not shift into the appropriate gear.
2. What are the possible causes of OBDII code P0757 in a Buick?
The code P0757 can be triggered by issues such as a faulty shift solenoid valve 2, low transmission fluid level, dirty or contaminated transmission fluid, wiring issues, or a defective transmission control module.
3. How serious is OBDII code P0757 in a Buick?
Code P0757 should be addressed promptly to prevent further damage to the transmission. Ignoring this issue can lead to more severe transmission problems and potential safety hazards.
4. Can OBDII code P0757 in a Buick be fixed at home?
Depending on your level of automotive expertise, you may be able to address this issue at home by checking the transmission fluid level, inspecting the wiring harness, and testing the shift solenoid valve 2. However, it is recommended to consult a professional mechanic for an accurate diagnosis and repair.
5. How much does it typically cost to repair OBDII code P0757 in a Buick?
The cost of repairing OBDII code P0757 can vary depending on the underlying cause. Simple fixes like replacing the shift solenoid valve 2 may cost a few hundred dollars, while more complex issues could run into the thousands in parts and labor.
6. Can driving with OBDII code P0757 in a Buick cause further damage?
Continued driving with code P0757 can lead to additional stress on the transmission components, potentially causing further damage and resulting in a more costly repair. It is best to address the issue promptly.
7. How long does it take to repair OBDII code P0757 in a Buick?
The repair time for OBDII code P0757 can vary depending on the specific cause and extent of the issue. Simple repairs may take a few hours, while more complex repairs could require leaving the vehicle at the repair shop for a day or more.
8. Is it safe to drive a Buick with OBDII code P0757?
Driving with OBDII code P0757 may not be safe as it can lead to transmission issues like harsh shifting or slippage, which could affect the vehicle's drivability and pose a safety risk. It is recommended to have the issue addressed as soon as possible.
9. Can a transmission flush fix OBDII code P0757 in a Buick?
In some cases, performing a transmission fluid flush and filter replacement may help resolve OBDII code P0757 if the issue is related to contaminated or deteriorated fluid. However, if the problem lies with the shift solenoid valve 2 or other internal components, a flush may not be sufficient.
10. Will resetting the OBDII code P0757 in a Buick make the issue go away?
Resetting the code may temporarily turn off the check engine light, but it will not fix the underlying problem causing code P0757. It is important to diagnose and address the root cause of the issue to prevent it from reoccurring.
Discuss the causes and fixes for P0757 Buick OBDII Code
Code P0757 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
