AutoCodesFord – P0753 Ford

P0753 Ford Code - Shift Solenoid 1 Performance

Quick Answer

Shift solenoid valve 1 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 1 valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0753 Ford indicates Shift Solenoid 1 Performance.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 1 valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 31,230
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0753 Ford Description

Shift solenoid valve 1 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
OBDII Code P0753 Ford - Shift Solenoid 1 Performance - AutoCodes.com
P0753 Ford Code - Shift Solenoid 1 Performance

What are the Possible Causes of the DTC P0753 Ford?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid 1 valve
  • Shift solenoid 1 valve harness or connectors
  • Shift solenoid 1 valve circuit is open or shorted

How to Fix the DTC P0753 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0753 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0753 Ford code?

Need more information on how to fix the P0753 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0753 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0753 Ford Code

1. What are the common symptoms of OBDII code P0753 (Ford) Shift Solenoid 1 Performance?

- Common symptoms include harsh shifting, delayed or erratic shifting, transmission slipping, and the transmission staying in one gear.

2. What can cause OBDII code P0753 (Ford) to trigger?

- The code P0753 is usually triggered by a faulty shift solenoid, low transmission fluid levels, a clogged transmission filter, or wiring/connectivity issues.

3. How serious is OBDII code P0753 (Ford) Shift Solenoid 1 Performance?

- While the vehicle may still be operable with this code, prolonged driving can cause further damage to the transmission. It is recommended to address the issue promptly.

4. Can I drive my vehicle with OBDII code P0753 (Ford) active?

- It is not recommended to drive the vehicle for an extended period with this code active to prevent potential damage to the transmission.

5. How do I diagnose OBDII code P0753 (Ford) Shift Solenoid 1 Performance?

- Diagnosis typically involves using a scan tool to check for the specific code, inspecting the transmission fluid level and condition, and testing the shift solenoid and related electrical connections.

6. Can I repair OBDII code P0753 (Ford) Shift Solenoid 1 Performance myself?

- Depending on your automotive repair skills, you may be able to replace the shift solenoid yourself. However, it is recommended to have a professional mechanic diagnose and repair the issue to ensure it is done correctly.

7. What is the typical cost to repair OBDII code P0753 (Ford) Shift Solenoid 1 Performance?

- The cost of repairing this code can vary depending on the underlying cause, but it may range from $200 to $500 for parts and labor.

8. How long does it take to repair OBDII code P0753 (Ford) Shift Solenoid 1 Performance?

- The repair time can vary based on the specific issue and the mechanic's experience, but it typically takes a few hours to complete the repair.

9. What should I do if OBDII code P0753 (Ford) keeps coming back after repairs?

- If the code keeps reappearing after repairs, it may indicate a deeper issue with the transmission system. It is recommended to have a professional mechanic perform a thorough inspection.

10. Can OBDII code P0753 (Ford) Shift Solenoid 1 Performance cause other problems in the vehicle?

- If left unresolved, this code can lead to further transmission issues, reduced fuel efficiency, and potential drivability problems. It is essential to address the underlying cause promptly.

Discuss the causes and fixes for P0753 Ford OBDII Code

  • Hi Its so well explained. I am happy with the guidance. But what exactly could cause the gear to miss behave and sometimes landing into limp mode "gear number 3" when demanding for higher performance say, like kickdown on various moments. This is after I have renewed the transmission oil and also had the oil filter changed. All solenoids cleaned well checked also for triggers during power supply. And ensured all electrical connections were good.

  • What model and year is your vehicle?

  • Hi I have a 2007 Ford Fusion SE 2.3 Litre. I have engine code PO753. The car will not shift higher than the 3rd gear. I changed the trans fluid, filter, and all of the solenoids and it still will not work. Please let me know what else to try,

  • If you have already change the fluid and filter, and all the solenoids, then the problem is more than likely a mechanical problem. Your next step is to have a transmission shop inspect and possible rebuild the transmission.

  • Thank you for your quick response. I have cleared the codes and drove it today around town. It shifts from 1st to 2nd and to 3rd but no higher. I put the scanner back on and it gave me the P0753 code again. I replaced the solenoids with rebuilt units on ebay. What are the odds I put in a faulty Shift solenoid A?

  • Unfortunately, the odds that the new solenoid is faulty are very low.

  • Just an update. I went to the used parts dealers and picked up a used 2006 2.3 litre Fnr5 Transmission Control Module for my 2007. Got home plugged it in and it works better than before. I appreciate your help on this. Hopefully it helps someone else.

  • Great!!! Thanks for sharing

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play