AutoCodes – Dodge – P0753 Dodge

P0753 Dodge Code - 3-4 Shift Solenoid Relay

Quick Answer

Shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0753 Dodge indicates 3-4 Shift Solenoid Relay.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 44,128
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0753 Dodge Description

Shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
OBDII Code P0753 Dodge - 3-4 Shift Solenoid Relay - AutoCodes.com
P0753 Dodge Code - 3-4 Shift Solenoid Relay

What are the Possible Causes of the DTC P0753 Dodge?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid valve
  • Shift solenoid valve harness or connectors
  • Shift solenoid valve circuit is open or shorted

How to Fix the DTC P0753 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0753 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0753 Dodge code?

Need more information on how to fix the P0753 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0753 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0753 Dodge Code

1. What does OBDII code P0753 for Dodge vehicles indicate?

The P0753 code refers to a malfunction in the 3-4 shift solenoid relay circuit in the transmission control system.

2. What are the common symptoms of a P0753 OBDII code in a Dodge vehicle?

Common symptoms include harsh shifting between gears, delayed or erratic shifting, transmission slipping, and the transmission getting stuck in a specific gear.

3. What are the possible causes of the P0753 OBDII code in a Dodge vehicle?

The code can be triggered by issues such as a faulty 3-4 shift solenoid relay, damaged wiring or connectors in the transmission system, low transmission fluid level, or a malfunctioning transmission control module.

4. How can I diagnose the cause of the P0753 OBDII code in my Dodge vehicle?

Diagnosing the issue involves conducting a thorough inspection of the transmission system, checking the wiring and connectors for any damage, testing the 3-4 shift solenoid relay, and scanning the transmission control module for fault codes.

5. Can I continue driving my Dodge with a P0753 OBDII code?

It is not recommended to continue driving with a P0753 code, as it can lead to further damage to the transmission system and potentially unsafe driving conditions.

6. How can I repair a P0753 OBDII code in my Dodge vehicle?

Repair options include replacing the faulty 3-4 shift solenoid relay, repairing damaged wiring or connectors, ensuring the transmission fluid level is adequate, and resetting the trouble codes after the repair.

7. Is it necessary to visit a mechanic for a P0753 OBDII code in my Dodge, or can I fix it myself?

The complexity of transmission system repairs often requires the expertise of a qualified mechanic, especially when dealing with solenoids and internal components. It is recommended to seek professional help for accurate diagnosis and repair.

8. Will clearing the trouble codes with a scanner resolve the P0753 OBDII code in my Dodge?

Clearing the trouble codes may temporarily turn off the check engine light, but it will not fix the underlying issue causing the P0753 code. Proper diagnosis and repair are necessary to address the root cause of the problem.

9. How much does it typically cost to repair a P0753 OBDII code in a Dodge vehicle?

The cost of repairs can vary depending on the specific issue causing the P0753 code, the labor rates in your area, and whether genuine Dodge parts are used. It is advisable to get a few quotes from reputable mechanics for an accurate estimate.

10. Are there any preventive maintenance tips to avoid encountering the P0753 OBDII code in my Dodge?

Regularly servicing the transmission system, checking and maintaining the transmission fluid level, and addressing any minor shifting issues promptly can help prevent the occurrence of the P0753 code in your Dodge vehicle.

Discuss the causes and fixes for P0753 Dodge OBDII Code

  • 47re transmissions 2x2 diesel 01 code po753 check f or open through g h relay 30ohm pin 21 relations goog fuse transmissions good change out filter tag will not shift to 4th

  • If there is a problem with shift solenoid A electrical would it cause the vehicle to not start?

  • Probably not, I haven't seen a solenoid causing a no start situation.

  • So where is the location of this solenoid relay??

  • What model, year and engine size is your Dodge? We need that information to get you the correct location.

    • can not erace code po543 from truck sharts in limp mode

      • Thanks for your question. Just to confirm β€” it sounds like you meant P0753 (3-4 shift solenoid issue), not P0543 (which is an intake air heater code on diesels). Based on the title of the page and your truck being stuck in limp mode, it's likely P0753. Could you please verify the code and provide your vehicle model and year?

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play