AutoCodes
 
OBDII Code List
 
P0753 ACURA

P0753 ACURA - Shift Solenoid 'A' Circuit Fault

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty shift solenoid 'A' valve
  • Shift solenoid 'A' valve harness or connectors
  • Shift solenoid 'A' valve circuit is open or shorted

Tech notes

Some Acura may have a short to ground in the BLK/YEL alternator wire and could cause the ECM/PCM to set the P0753 code and intermittently blow the No. 6 (15A) fuse in the driver’s under-dash fuse/relay box. To fix this problem, you need to repair the damaged wire insulation and replace the blown No. 6 fuse.

When is the code detected?

The P0753 code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven.

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Transmission will not shift gears

P0753 Acura Description

Shift solenoid valve A is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
OBDII Code P0753 Acura - Shift Solenoid 'A' Circuit Fault - AutoCodes.com

Need more help?

Get the P0753 Acura code diagnosed by a professional: Find a repair shop in your area

Related Information

P0753 ACURA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0753 Acura code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧