AutoCodes – Jeep – P0751 Jeep

P0751 Jeep Code - Over Drive Switch Pressed Low

Quick Answer

P0751 Jeep indicates Over Drive Switch Pressed Low. Common causes include Faulty overdrive off switch, Overdrive off switch harness or connectors, Overdrive off switch circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0751 Jeep indicates Over Drive Switch Pressed Low.
Common causes: Common causes include Faulty overdrive off switch, Overdrive off switch harness or connectors, Overdrive off switch circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,864

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 21, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0751 Jeep Description

OBDII Code P0751 Jeep - Over Drive Switch Pressed Low - AutoCodes.com — P0751 Jeep Code - Over Drive Switch Pressed Low

What does this mean?

What are the Possible Causes of the DTC P0751 Jeep?

Faulty overdrive off switch
Overdrive off switch harness or connectors
Overdrive off switch circuit is open or shorted

How to Fix the DTC P0751 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Over Drive (O/D) switch value has not changed for over 5 minutes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0751 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0751 Jeep code?

Need more information on how to fix the P0751 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0751 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0751 Jeep Code

1. What does the OBDII code P0751 mean on a Jeep?

P0751 indicates a problem with the shift solenoid "A," specifically that it is stuck in the off position or not functioning as expected, potentially affecting gear shifting.

2. What are the common symptoms of a P0751 code on a Jeep?

Symptoms may include difficulty shifting gears, the transmission being stuck in one gear, poor fuel efficiency, or the check engine light illuminating.

3. What causes a P0751 code on a Jeep?

Common causes include a faulty shift solenoid "A," low or dirty transmission fluid, wiring or connector issues in the transmission circuit, or internal transmission mechanical failure.

4. Can low transmission fluid cause the P0751 code on a Jeep?

Yes, low or dirty transmission fluid can cause the shift solenoid to malfunction, leading to the P0751 code.

5. How do I diagnose the P0751 code on my Jeep?

Start by checking the transmission fluid level and condition. Then inspect the wiring and connectors for damage. If theyâ€™re fine, test the shift solenoid "A" for proper functionality.

6. How serious is the P0751 code on a Jeep?

The P0751 code is moderately serious. While the vehicle may still be drivable, it can lead to further transmission damage or unsafe driving conditions if not addressed promptly.

7. How can I fix the P0751 code on my Jeep?

Repairs may include replacing the shift solenoid "A," flushing and refilling the transmission fluid, repairing damaged wiring or connectors, or addressing internal transmission issues.

8. Can I drive my Jeep with the P0751 code?

Driving with a P0751 code is not recommended, as it can cause further transmission damage or lead to unpredictable gear shifting.

9. What tools are needed to diagnose the P0751 code on a Jeep?

Youâ€™ll need an OBDII scanner, a multimeter for electrical testing, and basic tools to access the transmission components.

10. How much does it cost to fix a P0751 code on a Jeep?

The cost depends on the issue. Replacing a shift solenoid can cost $150â€“$400, while more extensive transmission repairs can exceed $1,000. Accurate diagnosis is crucial.