P0748 Scion Code - Pressure Control Solenoid 'A' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0748 Scion indicates Pressure Control Solenoid 'A' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0748 Scion Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL1 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any shift solenoid valve circuit, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting between the 4th and 5th gears, if the ECM detects an open or short in the shift solenoid valve SL1 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0748 Scion?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1)
- Pressure Control Solenoid 'A' valve harness is open or shorted
- Pressure Control Solenoid 'A' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0748 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0748 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0748 Scion code?
Need more information on how to fix the P0748 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0748 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0748 Scion Code
What does the OBDII code P0748 mean for a Scion?
P0748 indicates an electrical issue with the pressure control solenoid 'A', which helps regulate hydraulic pressure in the transmission.
What are the symptoms of code P0748 in a Scion?
Symptoms can include harsh or delayed shifting, transmission slipping, poor acceleration, and the Check Engine Light turning on.
What causes the P0748 code to appear?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or low transmission fluid.
Can driving with code P0748 damage my Scion?
Yes, driving with this code may cause further transmission damage and lead to unsafe driving conditions due to shifting problems.
How do I diagnose code P0748 in my Scion?
Diagnosis involves checking the solenoid’s electrical connections, inspecting wiring for damage, testing the solenoid with a multimeter, and verifying transmission fluid levels.
How do I fix code P0748 in a Scion?
Repairs may include replacing the pressure control solenoid, repairing or replacing damaged wiring, cleaning connectors, or updating/replacing the TCM.
What tools do I need to troubleshoot code P0748?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic tools to access the transmission components.
Can low transmission fluid cause the P0748 code in a Scion?
Yes, insufficient or dirty transmission fluid can affect solenoid performance and trigger this code.
How much does it cost to repair code P0748 on a Scion?
Repair costs vary but can range from $200 to $600 for solenoid replacement. Wiring repairs or TCM replacement may increase costs.
Is code P0748 specific to Scion vehicles?
No, P0748 is a generic OBDII code that can appear in various makes and models, though repair steps may differ slightly.
Discuss the causes and fixes for P0748 Scion OBDII Code
Code P0748 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
