P0748 2018 Toyota RAV4 Code - Pressure Control Solenoid 'A' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0748 2018 Toyota RAV4 indicates Pressure Control Solenoid 'A' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0748 2018 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL1 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any shift solenoid valve circuit, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting between the 4th and 5th gears, if the ECM detects an open or short in the shift solenoid valve SL1 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0748 2018 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1)
- Pressure Control Solenoid 'A' valve harness is open or shorted
- Pressure Control Solenoid 'A' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0748 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0748 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0748 2018 Toyota RAV4 code?
Need more information on how to fix the P0748 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0748 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0748 2018 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0748 in a 2018 Toyota RAV4?
- Common symptoms include harsh shifting, transmission slipping, poor fuel efficiency, and an illuminated Check Engine light.
2. What does OBDII code P0748 on a 2018 Toyota RAV4 indicate?
- OBDII code P0748 indicates an issue with the Pressure Control Solenoid 'A' electrical circuit in the vehicle's transmission.
3. What are the possible causes of OBDII code P0748 in a 2018 Toyota RAV4?
- Possible causes include a faulty pressure control solenoid 'A', damaged wiring or connectors in the electrical circuit, low transmission fluid level, or a malfunctioning transmission control module.
4. How can I diagnose the Pressure Control Solenoid 'A' electrical issue in my 2018 Toyota RAV4?
- Diagnosing the issue involves using an OBDII scanner to retrieve the fault code, conducting a visual inspection of wiring and connectors, testing the solenoid for resistance, and checking transmission fluid levels.
5. Can I continue driving my 2018 Toyota RAV4 with OBDII code P0748?
- It is not recommended to continue driving with this code as it can lead to further damage to the transmission. It is best to address the issue promptly.
6. Is it possible to repair OBDII code P0748 in a 2018 Toyota RAV4 myself?
- While some DIY enthusiasts may be able to address this issue, it is recommended to have a professional mechanic diagnose and repair the problem to ensure it is done correctly.
7. How much does it typically cost to repair OBDII code P0748 in a 2018 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue, but it can range from a few hundred to over a thousand dollars, including parts and labor.
8. What are some tips to prevent OBDII code P0748 from occurring in my 2018 Toyota RAV4?
- Regular maintenance of the transmission system, such as changing the fluid and filters as recommended by the manufacturer, can help prevent issues like P0748 from occurring.
9. Can a faulty pressure control solenoid 'A' cause other transmission problems in a 2018 Toyota RAV4?
- Yes, a faulty solenoid can lead to other transmission issues like erratic shifting, overheating, and ultimately transmission failure if not addressed promptly.
10. How long does it typically take to repair OBDII code P0748 in a 2018 Toyota RAV4?
- The repair time can vary depending on the exact cause of the issue and the availability of parts, but it may take a few hours to a day for a professional mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P0748 2018 Toyota RAV4 OBDII Code
Code P0748 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
