P0748 2016 Toyota RAV4 Code - Pressure Control Solenoid 'A' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0748 2016 Toyota RAV4 indicates Pressure Control Solenoid 'A' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0748 2016 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL1 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any shift solenoid valve circuit, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting between the 4th and 5th gears, if the ECM detects an open or short in the shift solenoid valve SL1 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0748 2016 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1)
- Pressure Control Solenoid 'A' valve harness is open or shorted
- Pressure Control Solenoid 'A' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0748 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0748 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0748 2016 Toyota RAV4 code?
Need more information on how to fix the P0748 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0748 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0748 2016 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0748 in a 2016 Toyota RAV4?
- Common symptoms include harsh shifting, transmission slippage, and decreased fuel efficiency.
2. What does the OBDII code P0748 in a 2016 Toyota RAV4 indicate?
- The code indicates a problem with the Pressure Control Solenoid 'A' electrical circuit in the transmission.
3. What are the possible causes of OBDII code P0748 in a 2016 Toyota RAV4?
- Possible causes include a faulty pressure control solenoid 'A', damaged wiring or connectors, low transmission fluid levels, or a malfunctioning PCM.
4. How can I diagnose the issue causing OBDII code P0748 in my 2016 Toyota RAV4?
- Diagnosis typically involves checking the transmission fluid level, inspecting the wiring and connectors for damage, and testing the pressure control solenoid 'A' for proper functionality.
5. Can I continue driving my 2016 Toyota RAV4 with OBDII code P0748?
- It is not recommended to continue driving with this code as it can lead to further transmission damage and potentially unsafe driving conditions.
6. How can I repair OBDII code P0748 in a 2016 Toyota RAV4?
- Repair may involve replacing the pressure control solenoid 'A', repairing any damaged wiring or connectors, topping up transmission fluid, or reprogramming the PCM.
7. Is it necessary to visit a mechanic for OBDII code P0748 in a 2016 Toyota RAV4?
- While some DIY enthusiasts may attempt repairs, it is advisable to consult a qualified mechanic for accurate diagnosis and proper repair of transmission-related issues.
8. How much does it typically cost to fix OBDII code P0748 in a 2016 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $800, including parts and labor.
9. Will resetting the OBDII code P0748 in my 2016 Toyota RAV4 make the issue disappear?
- Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the code to trigger.
10. How long does it take to repair OBDII code P0748 in a 2016 Toyota RAV4?
- The repair time can vary based on the specific issue, but it may take a few hours to a full day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P0748 2016 Toyota RAV4 OBDII Code
Code P0748 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
