AutoCodes – Honda – P0746 2016 Honda CR-V

P0746 2016 Honda CR-V Code - CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF

Quick Answer

The CVT drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. Common causes include CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF, Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0746 2016 Honda CR-V indicates CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF.
Common causes: Common causes include CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF, Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 342

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0746 2016 Honda CR-V Description

The CVT drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. The CVT drive pulley pressure control solenoid valve is controlled by duty cycle output. The spool in the CVT drive pulley pressure control solenoid valve moves the valve according to the current and produces hydraulic pressure in proportion to the current. To shift the transmission properly, the powertrain control module (PCM) outputs a drive pulley oil pressure control signal. If the pulley ratio is overdrive while the vehicle is stopped with the forward clutch engaged, the estimated input torque when starting is a specified value or more, and belt slippage does not occur when driving, the PCM detects a CVT drive pulley pressure control solenoid valve stuck OFF failure and stores a DTC.

OBDII Code P0746 2016 Honda CR-V - CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF - AutoCodes.com — P0746 2016 Honda CR-V Code - CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF

What does this mean?

What are the Possible Causes of the DTC P0746 2016 Honda CR-V?

CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF
Faulty CVT Drive Pulley Pressure Control Solenoid Valve
CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted
CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0746 2016 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0746 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0746 2016 Honda CR-V code?

Need more information on how to fix the P0746 2016 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0746 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0746 2016 Honda CR-V Code

1. What are the common symptoms of OBDII code P0746 in a 2016 Honda CR-V?

Common symptoms include decreased fuel efficiency, harsh shifting, transmission slipping, and the Check Engine light being illuminated.

2. What does the OBDII code P0746 indicate in a 2016 Honda CR-V?

OBDII code P0746 indicates an issue with the CVT Drive Pulley Pressure Control Solenoid Valve being stuck in the OFF position.

3. What are the possible causes of OBDII code P0746 in a 2016 Honda CR-V?

Possible causes include a faulty pressure control solenoid valve, wiring issues, low transmission fluid, or internal transmission problems.

4. How serious is OBDII code P0746 in a 2016 Honda CR-V?

Ignoring OBDII code P0746 can lead to further damage to the transmission system, potentially resulting in expensive repairs if left unresolved.

5. Can I drive my 2016 Honda CR-V with OBDII code P0746?

It is not recommended to drive the vehicle with OBDII code P0746 as it can cause further damage to the transmission system. It's best to address the issue promptly.

6. How can I diagnose OBDII code P0746 in a 2016 Honda CR-V?

Diagnosis involves using an OBDII scanner to retrieve the trouble code, checking the transmission fluid level and condition, and inspecting the pressure control solenoid valve and its wiring.

7. How can I repair OBDII code P0746 in a 2016 Honda CR-V?

Repair options may include replacing the faulty pressure control solenoid valve, fixing any wiring issues, ensuring proper transmission fluid levels, or seeking professional help for internal transmission repairs.

8. Can a DIY enthusiast fix OBDII code P0746 in a 2016 Honda CR-V?

While some simple repairs like checking and topping up transmission fluid can be done by a DIY enthusiast, fixing the pressure control solenoid valve or internal transmission issues may require professional expertise.

9. How much does it cost to repair OBDII code P0746 in a 2016 Honda CR-V?

The cost of repair can vary depending on the exact cause of the issue. It's recommended to get a diagnostic from a qualified mechanic to determine the cost accurately.

10. How can I prevent OBDII code P0746 from occurring in my 2016 Honda CR-V?

Regular maintenance, including checking and changing transmission fluid at recommended intervals, can help prevent issues like OBDII code P0746 from occurring in your vehicle.