AutoCodes – Honda – P0741 2016 Honda CR-V

P0741 2016 Honda CR-V Code - Torque Converter Clutch Circuit Performance or Stuck OFF

Quick Answer

The power transfer capacity of the torque converter clutch is controlled by the balance of transmission fluid supply to and discharge from the torque converter. Common causes include Torque converter clutch failure, CVT lock-up clutch control solenoid valve stuck off, Shift solenoid valve B stuck off. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0741 2016 Honda CR-V indicates Torque Converter Clutch Circuit Performance or Stuck OFF.
Common causes: Common causes include Torque converter clutch failure, CVT lock-up clutch control solenoid valve stuck off, Shift solenoid valve B stuck off.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 406

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0741 2016 Honda CR-V Description

The power transfer capacity of the torque converter clutch is controlled by the balance of transmission fluid supply to and discharge from the torque converter. When hydraulic pressure is applied internally, the torque converter clutch turns ON, and when hydraulic pressure is applied from the back pressure side, the torque converter clutch turns OFF. As the hydraulic pressure from the internal pressure side increases, the power transfer capacity of the torque converter clutch increases. The direction of the hydraulic pressure supply is switched by shift solenoid valve B and the LC shift valve. Transmission fluid is supplied from the internal pressure side to shift solenoid valve B when the signal from the Powertrain Control Module (PCM) is ON (12 V), and transmission fluid is supplied from the back pressure side when it is OFF (0 V). The balance of internal pressure and back pressure is controlled by the CVT lock-up clutch control solenoid valve and the LC control valve. The CVT lock-up clutch control solenoid valve maximizes the power transfer capacity of the torque converter clutch when the signal from the PCM is ON (1 A), and it minimizes the power transfer capacity of the torque converter clutch when the signal from the PCM is OFF (0 A). If the ratio of engine speed and input shaft speed is not about 1:1 while the PCM is issuing the command to turn shift solenoid valve B and the CVT lock-up clutch control solenoid valve ON, the PCM detects a faulty lock-up control system and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0741 2016 Honda CR-V - Torque Converter Clutch Circuit Performance or Stuck OFF - AutoCodes.com — P0741 2016 Honda CR-V Code - Torque Converter Clutch Circuit Performance or Stuck OFF

What does this mean?

What are the Possible Causes of the DTC P0741 2016 Honda CR-V?

Torque converter clutch failure
CVT lock-up clutch control solenoid valve stuck off
Shift solenoid valve B stuck off
LC shift valve stuck
LC control valve stuck

How to Fix the DTC P0741 2016 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0741 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0741 2016 Honda CR-V code?

Need more information on how to fix the P0741 2016 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0741 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0741 2016 Honda CR-V Code

1. What are the common symptoms of OBDII code P0741 in a 2016 Honda CR-V?

Symptoms may include decreased fuel efficiency, trouble shifting gears, and the Check Engine light illuminating.

2. What does the OBDII code P0741, Torque Converter Clutch Circuit Performance or Stuck OFF, indicate in a 2016 Honda CR-V?

This code typically points to an issue with the torque converter clutch system not operating as expected.

3. What are some possible causes of OBDII code P0741 in a 2016 Honda CR-V?

Potential causes include a faulty torque converter clutch solenoid, low transmission fluid levels, a damaged torque converter, or wiring/connectivity issues.

4. Can driving with OBDII code P0741 in a 2016 Honda CR-V cause further damage?

Continued driving with this issue may lead to decreased fuel economy, overheating of the transmission fluid, and potential damage to the transmission components.

5. How can I diagnose OBDII code P0741 in a 2016 Honda CR-V?

Diagnosis often involves scanning the vehicle's computer for the code, checking transmission fluid levels and condition, and conducting a thorough inspection of the torque converter and related components.

6. Is it safe to continue driving a 2016 Honda CR-V with OBDII code P0741?

It's recommended to address this issue promptly to prevent potential transmission damage and ensure optimal vehicle performance.

7. Can I reset the Check Engine light after repairing OBDII code P0741 in a 2016 Honda CR-V?

After repairing the underlying issue causing the code, the Check Engine light can be reset using an OBDII scanner or by disconnecting the car's battery for a few minutes.

8. How much does it typically cost to repair OBDII code P0741 in a 2016 Honda CR-V?

Repair costs can vary depending on the specific cause, but they may range from a few hundred to over a thousand dollars, especially if professional diagnostic and repair services are required.

9. Are there any DIY repair tips for addressing OBDII code P0741 in a 2016 Honda CR-V?

While some basic checks like inspecting transmission fluid levels can be done by DIY enthusiasts, diagnosing and repairing the root cause of the code may require specialized tools and expertise.

10. How long can I safely drive a 2016 Honda CR-V with OBDII code P0741 before getting it repaired?

It is advisable to address the issue as soon as possible to prevent potential transmission damage. Avoid prolonged driving with this code to ensure the safety and longevity of your vehicle.