P0736 Suzuki Code - Incorrect Reverse Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0736 Suzuki indicates Incorrect Reverse Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0736 Suzuki Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
What are the Possible Causes of the DTC P0736 Suzuki?
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0736 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0736 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0736 Suzuki code?
Need more information on how to fix the P0736 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0736 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0736 Suzuki Code
1. What does the OBDII code P0736 mean on a Suzuki?
P0736 indicates "Incorrect Reverse Ratio," meaning the transmission is not detecting the expected gear ratio while in reverse.
2. What are the symptoms of the P0736 code on a Suzuki?
Common symptoms include difficulty engaging reverse gear, slipping in reverse, poor acceleration in reverse, and the check engine light turning on.
3. What causes the P0736 code to appear on a Suzuki?
Possible causes include low or dirty transmission fluid, a faulty transmission control module (TCM), damaged reverse gear components, or a malfunctioning speed sensor.
4. Can driving with the P0736 code damage my Suzuki?
Yes, driving with this code can lead to further transmission damage if the issue is not addressed promptly.
5. How do I fix the P0736 code on my Suzuki?
Start by checking the transmission fluid level and condition. If the fluid is fine, inspect the speed sensors, solenoids, and internal transmission components for damage.
6. Is the P0736 code specific to Suzuki vehicles?
No, the P0736 code is a generic OBDII code that can appear on many vehicles, but the specific repairs may vary depending on the make and model.
7. How much does it cost to repair the P0736 code on a Suzuki?
The repair cost depends on the root cause. Fluid replacement is inexpensive, but repairing or replacing internal transmission components can be costly, often ranging from $500 to $3,000.
8. Can I clear the P0736 code without repairing the issue?
Clearing the code without resolving the problem may temporarily turn off the check engine light, but the issue will likely return.
9. What tools do I need to diagnose the P0736 code on a Suzuki?
You’ll need an OBDII scanner to read the code and a multimeter to test electrical components like speed sensors and solenoids.
10. Should I take my Suzuki to a mechanic for the P0736 code?
If basic checks like fluid level and condition don’t resolve the issue, it’s best to consult a qualified mechanic for further diagnosis and repair.
Discuss the causes and fixes for P0736 Suzuki OBDII Code
Code P0736 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
