P0734 Suzuki Code - Gear 4 Incorrect Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0734 Suzuki indicates Gear 4 Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0734 Suzuki Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0734 Suzuki?
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0734 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0734 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0734 Suzuki code?
Need more information on how to fix the P0734 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0734 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0734 Suzuki Code
1. What does the OBDII code P0734 mean on a Suzuki?
P0734 indicates that the transmission control module (TCM) has detected an incorrect gear ratio in 4th gear, suggesting an issue with the transmission or related components.
2. What are the common symptoms of the P0734 code on a Suzuki?
Symptoms include slipping or harsh shifting in 4th gear, reduced fuel efficiency, a check engine light, and, in some cases, the transmission going into limp mode.
3. What causes the P0734 code to appear in a Suzuki vehicle?
Common causes include low or dirty transmission fluid, a faulty shift solenoid, a malfunctioning transmission control module, or mechanical issues like worn clutches or gears.
4. Can driving with the P0734 code damage my Suzuki?
Yes, driving with this code can cause further damage to the transmission if not addressed promptly, especially if the issue involves mechanical wear or overheating.
5. How do I diagnose the P0734 code on a Suzuki?
Diagnose the code by checking the transmission fluid level and condition, inspecting wiring and connectors for damage, testing the shift solenoids, and performing a transmission pressure test.
6. Can low transmission fluid cause the P0734 code in a Suzuki?
Yes, low or contaminated transmission fluid can lead to improper gear engagement and trigger the P0734 code.
7. How do I fix the P0734 code on my Suzuki?
Repairs may include refilling or replacing the transmission fluid, replacing a faulty shift solenoid, repairing damaged wiring, or rebuilding the transmission if mechanical components are worn.
8. How much does it cost to fix the P0734 code on a Suzuki?
Costs vary depending on the cause; transmission fluid changes may cost $100-$200, while solenoid replacement or transmission rebuilds can range from $500 to over $3,000.
9. Can a faulty speed sensor trigger the P0734 code on a Suzuki?
Yes, a malfunctioning speed sensor can provide incorrect data to the TCM, leading to the detection of an incorrect gear ratio in 4th gear.
10. Is it safe to reset the P0734 code without fixing the issue on a Suzuki?
Resetting the code without addressing the underlying issue is not recommended, as the problem will likely recur and could lead to further damage.
Discuss the causes and fixes for P0734 Suzuki OBDII Code
Code P0734 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
