P0733 2018 Chevrolet Silverado Code - Transmission 3rd Gear Ratio Incorrect
Quick Answer
The transmission turbine speed sensor and vehicle speed sensor are hall-effect sensors. Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Faulty Turbine Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0733 2018 Chevrolet Silverado indicates Transmission 3rd Gear Ratio Incorrect.
- Common causes
- Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Faulty Turbine Sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0733 2018 Chevrolet Silverado Description
The TCM provides a 9 V reference circuit and a signal circuit to each of the sensors. As the 1-2-3-4-5-6 clutch piston housing and transmission output shaft or transfer case output rotates, the sensors produce a signal frequency based on the teeth on the reluctor wheel. The TCM calculates the transmission gear ratio based on the speed sensor signals and compares the calculated gear ratio to the commanded gear ratio.
The Diagnostic Trouble Code (DTC) will be set when the TCM detects the calculated gear ratio with 3rd gear commanded differs from the known 6th gear ratio for 2 s.
What are the Possible Causes of the DTC P0733 2018 Chevrolet Silverado?
- Low transmission fluid level
- Shift solenoid mechanical fault
- Faulty Turbine Sensor
- Faulty Output Speed Sensor
How to Fix the DTC P0733 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0733 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0733 2018 Chevrolet Silverado code?
Need more information on how to fix the P0733 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0733 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0733 2018 Chevrolet Silverado Code
1. What does the OBDII code P0733 mean on a 2018 Chevrolet Silverado?
P0733 indicates that the Powertrain Control Module (PCM) has detected an incorrect gear ratio in 3rd gear, meaning the transmission is not performing as expected in that gear.
2. What are common symptoms of the P0733 code on a 2018 Chevrolet Silverado?
Common symptoms include slipping in 3rd gear, harsh or delayed shifting, poor acceleration, decreased fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P0733 code on a 2018 Chevrolet Silverado?
Possible causes include low transmission fluid, a faulty shift solenoid, worn or damaged transmission components (like clutches or bands), or a malfunctioning PCM.
4. Can low transmission fluid cause a P0733 code on my Silverado?
Yes, low or contaminated transmission fluid can result in improper hydraulic pressure, leading to the incorrect gear ratio and triggering the P0733 code.
5. How can I fix the P0733 code on my 2018 Chevrolet Silverado?
Repairs may involve checking and topping off transmission fluid, replacing a faulty shift solenoid, repairing internal transmission damage, or reprogramming or replacing the PCM.
6. Is it safe to drive my 2018 Chevrolet Silverado with a P0733 code?
Driving with a P0733 code is not recommended, as it may cause further damage to the transmission and lead to more expensive repairs.
7. How do I diagnose the P0733 code on my Silverado?
Diagnosis typically includes checking transmission fluid levels, scanning for additional codes, inspecting the shift solenoids, testing the transmission hydraulic pressure, and possibly inspecting internal transmission components.
8. Can a faulty PCM cause the P0733 code in a 2018 Chevrolet Silverado?
Yes, a malfunctioning PCM can send incorrect signals to the transmission, resulting in improper gear ratios and the P0733 code.
9. How much does it cost to repair a P0733 code on a 2018 Chevrolet Silverado?
Repair costs vary depending on the issue, ranging from around $100 for a fluid change to over $2,000 if a transmission rebuild or replacement is needed.
10. Will clearing the P0733 code fix the problem on my Silverado?
No, clearing the code will only turn off the warning temporarily. The underlying issue causing the code must be addressed to prevent it from returning.
Discuss the causes and fixes for P0733 2018 Chevrolet Silverado OBDII Code
Code P0733 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.