P0732 Land Rover Code - Gear 2 Incorrect Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0732 Land Rover indicates Gear 2 Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0732 Land Rover Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0732 Land Rover?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0732 Land Rover?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0732 Land Rover code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0732 Land Rover code?
Need more information on how to fix the P0732 Land Rover code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0732 Land Rover code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0732 Land Rover Code
1. What are the common symptoms of OBDII code P0732 (Gear 2 Incorrect Ratio) in a Land Rover?
- Common symptoms include harsh shifting, slipping gears, hesitation when accelerating, and illuminated transmission warning lights.
2. What are the possible causes of OBDII code P0732 in a Land Rover?
- The code P0732 can be caused by issues such as low transmission fluid levels, a faulty transmission solenoid, a worn-out clutch, or a malfunctioning transmission control module.
3. How can I diagnose the OBDII code P0732 in my Land Rover?
- Diagnosing the code P0732 may involve checking the transmission fluid level and condition, conducting a visual inspection of the transmission components, and using a scan tool to retrieve additional trouble codes.
4. Can I continue driving my Land Rover with OBDII code P0732 present?
- It is not recommended to continue driving with the code P0732 present, as it can lead to further damage to the transmission and potentially result in a complete transmission failure.
5. What are some repair tips for fixing OBDII code P0732 in a Land Rover?
- Repair tips may include checking and topping up transmission fluid, replacing a faulty transmission solenoid or clutch, clearing the trouble code with a scan tool, and performing a test drive to verify the repair.
6. How much does it typically cost to repair OBDII code P0732 in a Land Rover?
- The cost of repairing the code P0732 can vary depending on the specific cause of the issue, but it may range from a few hundred dollars for minor repairs to over a thousand dollars for more complex transmission repairs.
7. Can a DIY enthusiast fix OBDII code P0732 in a Land Rover?
- While some basic maintenance tasks related to the code P0732 can be performed by a DIY enthusiast, diagnosing and repairing more complicated transmission issues may require specialized tools and expertise best left to professional mechanics.
8. Is it possible for OBDII code P0732 to reoccur after repairs have been made?
- Yes, it is possible for the code P0732 to reoccur if the underlying issue was not properly diagnosed and repaired, or if there are other hidden problems within the transmission system.
9. Are there any preventive measures to avoid OBDII code P0732 in a Land Rover?
- Regularly servicing the transmission, checking and maintaining proper fluid levels, avoiding aggressive driving, and addressing any minor transmission issues promptly can help prevent the occurrence of code P0732.
10. How urgent is it to address OBDII code P0732 in a Land Rover?
- It is important to address the code P0732 promptly to prevent further damage to the transmission and avoid potentially costly repairs in the future.
Discuss the causes and fixes for P0732 Land Rover OBDII Code
Code P0732 Land Rover comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
