P0732 Hyundai Code - Second Gear Incorrect Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0732 Hyundai indicates Second Gear Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0732 Hyundai Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0732 Hyundai?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0732 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0732 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0732 Hyundai code?
Need more information on how to fix the P0732 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0732 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0732 Hyundai Code
1. What does the OBDII code P0732 mean on a Hyundai?
P0732 indicates that the transmission is experiencing an incorrect ratio in second gear, meaning the gear ratio is outside the expected range.
2. What are the common symptoms of the P0732 code on a Hyundai?
Symptoms include slipping in second gear, rough shifting, delayed acceleration, poor fuel economy, and the Check Engine Light being illuminated.
3. What causes the P0732 code on a Hyundai?
Common causes include low or dirty transmission fluid, a faulty transmission solenoid, damaged or worn clutch components, or internal transmission issues.
4. Can driving with the P0732 code damage my Hyundai?
Yes, continuing to drive with this code can cause further damage to the transmission and lead to more expensive repairs.
5. How do I diagnose the P0732 code on a Hyundai?
Diagnosis involves checking the transmission fluid level and condition, testing the transmission solenoids, inspecting wiring and connectors, and possibly performing a pressure test on the transmission.
6. How can I fix the P0732 code on my Hyundai?
Repairs may include replacing the transmission fluid, repairing or replacing faulty solenoids, addressing internal transmission issues, or updating the transmission control module software.
7. Is low transmission fluid a common cause of the P0732 code on a Hyundai?
Yes, low or contaminated transmission fluid can prevent proper gear engagement and lead to the P0732 code.
8. How much does it cost to repair the P0732 code on a Hyundai?
Costs vary widely depending on the cause, ranging from $100 for fluid replacement to several thousand dollars for transmission rebuilds.
9. Can a faulty transmission control module trigger the P0732 code on a Hyundai?
Yes, a malfunctioning transmission control module can misinterpret gear ratios and cause this code to appear.
10. Should I reset the P0732 code before fixing the problem on my Hyundai?
No, resetting the code without addressing the underlying issue can lead to recurring problems and may make accurate diagnosis more difficult.
Discuss the causes and fixes for P0732 Hyundai OBDII Code
-
is occurring is failure in a Tucson, oil is clean and on level, which selenoide I change?
-
the car is struggling in second gear, and also has the code C1208 and C1211 in the ABS, which are the speed sensors of the rear wheels, this may have some relation?
-
If the problem were the ABS sensors, then the sensors will affect all the gears and not just the second. A faulty Shift Solenoid usually improves with new transmission fluid, and if the problem is the solenoid, it requires removing the transmission pan and transmission valve body to access the solenoid. Due to the age of your Tucson, the problem is more than likely mechanical. I recommend having a transmission shop diagnose the problem.
-
I have accent hundai 2016 it has p0732 (gear 2 incorrect ratio) code, when I pass over 40km/h it stucks in gear 4 and it only reset when I stop switch off the car and starts the engine a gain plz help
-
I own a Hyundai Accent 2018
When I put a gearbox on n, it goes forward and on d, sometimes it goes or does not go, but when it is put on r, it does not go backwards, it becomes p-shaped
When used manually, it does not change but stays at #1
What is the cause of the problem please
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
