P0731 Land Rover Code - Gear 1 Incorrect Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (1st) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0731 Land Rover indicates Gear 1 Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0731 Land Rover Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (1st) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0731 Land Rover?
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0731 Land Rover?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0731 Land Rover code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0731 Land Rover code?
Need more information on how to fix the P0731 Land Rover code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0731 Land Rover code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0731 Land Rover Code
1. What are the common symptoms of OBDII code P0731 in a Land Rover indicating Gear 1 Incorrect Ratio?
- Common symptoms include harsh shifting, slipping gears, delayed engagement, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P0731 in a Land Rover?
- The code P0731 can be triggered by issues such as low transmission fluid level, faulty transmission solenoid, damaged clutch components, or a failing transmission control module.
3. How serious is the OBDII code P0731 in a Land Rover?
- The P0731 code should be addressed promptly as it can lead to further damage to the transmission if left untreated. Continuing to drive with this issue can result in costly repairs.
4. Can I continue driving my Land Rover with OBDII code P0731?
- It is not recommended to continue driving your vehicle with the P0731 code present, as it can cause damage to the transmission. It is best to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose the OBDII code P0731 in my Land Rover?
- Proper diagnosis of the P0731 code involves using a scan tool to retrieve the trouble code, checking the transmission fluid level and condition, and inspecting the transmission components for any visible signs of damage.
6. What are some DIY repair tips for fixing OBDII code P0731 in a Land Rover?
- DIY repair tips include checking and topping up the transmission fluid, inspecting for any loose or damaged wiring, and cleaning or replacing the transmission solenoid if necessary. However, more complex repairs may require professional assistance.
7. How much does it cost to repair OBDII code P0731 in a Land Rover?
- The cost of repairing the P0731 code in a Land Rover can vary depending on the underlying cause of the issue. Simple fixes like fluid top-up may be inexpensive, while more extensive repairs such as replacing transmission components can be costly.
8. Can a faulty sensor trigger OBDII code P0731 in a Land Rover?
- Yes, a faulty sensor, such as a transmission speed sensor or throttle position sensor, can sometimes cause the transmission to shift incorrectly, leading to the P0731 code being triggered.
9. How long does it take to repair OBDII code P0731 in a Land Rover?
- The repair time for the P0731 code can vary based on the specific cause of the issue. Simple fixes may only take a few hours, while more complex repairs could require several days depending on the availability of parts and labor.
10. Is it necessary to reset the OBDII code P0731 after repairing the issue in a Land Rover?
- Yes, it is recommended to reset the code after repairing the underlying issue to clear the Check Engine Light and ensure that the transmission is functioning properly.
Discuss the causes and fixes for P0731 Land Rover OBDII Code
Code P0731 Land Rover comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
