P0730 Ford Code - Incorrect Gear Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from speed sensor (revolution sensor) B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0730 Ford indicates Incorrect Gear Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0730 Ford Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from speed sensor (revolution sensor)
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0730 Ford?
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0730 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0730 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0730 Ford code?
Need more information on how to fix the P0730 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0730 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0730 Ford Code
1. What are the common symptoms of OBDII code P0730 Ford (Incorrect Gear Ratio)?
- Common symptoms include harsh shifting, delayed shifting, slipping gears, and the transmission not engaging properly.
2. What are some possible causes of OBDII code P0730 Ford?
- Possible causes include low transmission fluid levels, a faulty transmission control module, worn clutch components, and a damaged torque converter.
3. How can I diagnose the OBDII code P0730 Ford?
- Diagnosing the code typically involves using a scan tool to read the code, checking transmission fluid levels and condition, inspecting for any visible damage to transmission components, and performing a road test to observe the shifting behavior.
4. What are some repair tips for addressing OBDII code P0730 Ford?
- Repair tips may include checking and topping up transmission fluid, performing a transmission fluid flush and filter replacement, inspecting and replacing worn clutch components, and recalibrating the transmission control module.
5. Can driving with OBDII code P0730 Ford cause further damage to the vehicle?
- Continuing to drive with this code can potentially cause further damage to the transmission components, leading to more costly repairs in the future. It is recommended to address the issue promptly.
6. Is it safe to continue driving my vehicle with OBDII code P0730 Ford?
- It is not recommended to continue driving the vehicle with this code, as it can result in transmission issues that may compromise safety and lead to more extensive repairs.
7. How much does it typically cost to repair OBDII code P0730 Ford?
- The cost of repair can vary depending on the specific cause of the code and the extent of the damage. It is advisable to consult with a professional mechanic for an accurate diagnosis and cost estimate.
8. Can I reset the OBDII code P0730 Ford on my own?
- While you can clear the code using a scan tool, it is important to address the underlying issue causing the code to prevent it from reoccurring. Simply clearing the code without fixing the problem will not resolve the issue.
9. Are there any preventive maintenance measures to avoid OBDII code P0730 Ford?
- Regularly checking and maintaining proper transmission fluid levels, following the manufacturer's recommended service intervals for transmission fluid changes, and addressing any transmission issues promptly can help prevent this code from occurring.
10. How long does it take to repair OBDII code P0730 Ford?
- The repair time can vary depending on the specific cause of the code, the availability of parts, and the mechanic's workload. Some repairs may be completed in a few hours, while more complex issues may take longer to resolve.
Discuss the causes and fixes for P0730 Ford OBDII Code
Code P0730 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
