AutoCodesMitsubishi – P0729 Mitsubishi

P0729 Mitsubishi Code - Automatic Transmission 6th Gear Incorrect Ratio

Quick Answer

This malfunction is detected when the A/T does not shift into 6GR position as instructed by TCM. Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Hydraulic circuit fault. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0729 Mitsubishi indicates Automatic Transmission 6th Gear Incorrect Ratio.
Common causes
Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Hydraulic circuit fault.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,996
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 29, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0729 Mitsubishi Description

This malfunction is detected when the A/T does not shift into 6GR position as instructed by TCM. This is not only caused by electrical malfunction (circuits open or shorted) but by mechanical malfunction such as control valve sticking, improper solenoid valve operation, etc.
OBDII Code P0729 Mitsubishi - Automatic Transmission 6th Gear Incorrect Ratio - AutoCodes.com
P0729 Mitsubishi Code - Automatic Transmission 6th Gear Incorrect Ratio

What are the Possible Causes of the DTC P0729 Mitsubishi?

  • Low transmission fluid level
  • Shift solenoid mechanical fault
  • Hydraulic circuit fault
  • Transmission failure

How to Fix the DTC P0729 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0729 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0729 Mitsubishi code?

Need more information on how to fix the P0729 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0729 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0729 Mitsubishi Code

What does OBD-II code P0729 mean in a Mitsubishi?

Code P0729 indicates that the transmission’s 6th gear is not maintaining the correct gear ratio, which could be caused by mechanical or electrical issues.

What are the symptoms of code P0729 in a Mitsubishi?

Symptoms may include erratic shifting, slipping in 6th gear, reduced fuel efficiency, and illumination of the check engine light.

Can driving with code P0729 damage my car?

Yes, driving with this code can lead to further transmission damage and reduced performance, potentially increasing repair costs over time.

What causes code P0729 in a Mitsubishi?

Common causes include faulty shift solenoids, worn clutch components, transmission fluid issues, or problems with the transmission control module (TCM).

How can I diagnose code P0729 in a Mitsubishi?

Diagnosis typically involves scanning for stored codes, inspecting transmission fluid, testing shift solenoids, and verifying the functionality of the TCM.

How do I fix code P0729 on my Mitsubishi?

Repairs may include replacing damaged solenoids, refilling or flushing transmission fluid, repairing the TCM, or addressing internal transmission wear.

Can low transmission fluid cause code P0729?

Yes, low or degraded transmission fluid can lead to incorrect gear ratios and trigger this code.

What tools are needed to fix code P0729?

You may need an OBD-II scanner, multimeter, transmission fluid tools, and possibly specialty transmission repair equipment.

Is code P0729 specific to Mitsubishi vehicles?

No, P0729 can appear in various vehicles with automatic transmissions, but specific diagnostic and repair steps may vary by make and model.

Should I take my Mitsubishi to a mechanic for code P0729?

If you're unsure about diagnosing or repairing transmission issues, it’s best to consult a qualified mechanic to prevent further damage.

Discuss the causes and fixes for P0729 Mitsubishi OBDII Code

Code P0729 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play