P0723 2010 Ford Fusion Code - Output Shaft Speed Sensor Circuit Intermittent Failure
Quick Answer
The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0723 2010 Ford Fusion indicates Output Shaft Speed Sensor Circuit Intermittent Failure.
- Common causes
- Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0723 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0723 2010 Ford Fusion?
- Faulty Output Speed Sensor (OSS)
- Output Speed Sensor harness is open or shorted
- Output Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0723 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0723 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0723 2010 Ford Fusion code?
Need more information on how to fix the P0723 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0723 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0723 2010 Ford Fusion Code
1. What does the OBDII code P0723 mean for a 2010 Ford Fusion?
It indicates an intermittent failure in the Output Shaft Speed (OSS) Sensor circuit, which monitors the speed of the transmission's output shaft.
2. What are the common symptoms of code P0723 on a 2010 Ford Fusion?
Symptoms include erratic or delayed shifting, the transmission going into limp mode, poor acceleration, and the check engine light turning on.
3. What causes the P0723 code in a 2010 Ford Fusion?
Common causes include a faulty OSS sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning powertrain control module (PCM), or internal transmission issues.
4. Can a faulty OSS sensor damage the transmission in my 2010 Ford Fusion?
If left unaddressed, a faulty OSS sensor can cause improper shifting, which might lead to long-term transmission wear or damage.
5. How do I diagnose the P0723 code on a 2010 Ford Fusion?
Diagnosis involves scanning for codes, inspecting the OSS sensor and its wiring for damage, testing the sensor using a multimeter, and verifying proper signal output to the PCM.
6. Can I drive my 2010 Ford Fusion with a P0723 code?
It’s not recommended, as the transmission may not function properly, potentially leading to unsafe driving conditions or further damage.
7. How do I fix the P0723 code on a 2010 Ford Fusion?
Repairs may include replacing the OSS sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
8. Where is the OSS sensor located on a 2010 Ford Fusion?
The OSS sensor is typically mounted on the transmission housing, near the output shaft.
9. How much does it cost to fix the P0723 code on a 2010 Ford Fusion?
Repairs can range from $100 to $500, depending on whether the OSS sensor, wiring, or PCM needs repair or replacement.
10. Can a low transmission fluid level cause the P0723 code?
While uncommon, low transmission fluid can lead to improper sensor readings or transmission performance, contributing to the P0723 code.
Discuss the causes and fixes for P0723 2010 Ford Fusion OBDII Code
Code P0723 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
