AutoCodes – Ford – P0722 2012 Ford Fusion

P0722 2012 Ford Fusion Code - Output Shaft Speed Sensor No Signal

Quick Answer

The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0722 2012 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
Common causes: Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,649

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0722 2012 Ford Fusion Description

The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. The PCM uses the information to control and diagnose powertrain behavior. In some applications, the sensor is also used as the source of vehicle speed. The sensor may be physically located in different places on the vehicle, depending upon the specific application. The design of each speed sensor is unique and depends on which powertrain control feature uses the information that is generated. The Diagnostic Trouble Code (DTC) will set if the PCM detects no signal from the OSS sensor.

OBDII Code P0722 2012 Ford Fusion - Output Shaft Speed Sensor No Signal - AutoCodes.com — P0722 2012 Ford Fusion Code - Output Shaft Speed Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P0722 2012 Ford Fusion?

Faulty Output Speed Sensor (OSS)
Output Speed Sensor harness is open or shorted
Output Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0722 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0722 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0722 2012 Ford Fusion code?

Need more information on how to fix the P0722 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0722 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0722 2012 Ford Fusion Code

1. What does the OBDII code P0722 mean for a 2012 Ford Fusion?

P0722 indicates that the transmission control module (TCM) is not receiving a signal from the output shaft speed (OSS) sensor.

2. What are the common symptoms of code P0722 in a 2012 Ford Fusion?

Symptoms may include erratic shifting, the transmission staying in one gear, poor acceleration, the speedometer not working properly, and the check engine light illuminating.

3. What causes the P0722 code to appear on a 2012 Ford Fusion?

Possible causes include a faulty OSS sensor, damaged wiring or connectors, a malfunctioning TCM, or internal transmission issues.

4. Can I drive my 2012 Ford Fusion with a P0722 code?

Driving with this code is not recommended, as it can lead to poor transmission performance and potentially cause further damage if not addressed.

5. How do I diagnose the P0722 code on a 2012 Ford Fusion?

Diagnosis typically involves checking the OSS sensor, inspecting wiring and connectors for damage, scanning for additional trouble codes, and testing the TCM if necessary.

6. How do I fix the P0722 code on a 2012 Ford Fusion?

Repairs may include replacing the OSS sensor, repairing or replacing damaged wiring or connectors, updating or reprogramming the TCM, or addressing internal transmission problems.

7. Where is the output shaft speed sensor located on a 2012 Ford Fusion?

The OSS sensor is typically located on the transmission, near the output shaft.

8. How much does it cost to fix a P0722 code on a 2012 Ford Fusion?

Repair costs can range from $100 to $300 for sensor replacement or wiring repairs, but costs may be higher if TCM or transmission issues are involved.

9. Can a bad OSS sensor cause other issues in a 2012 Ford Fusion?

Yes, a faulty OSS sensor can lead to transmission shifting problems, reduced fuel efficiency, and potentially damage other components if left unaddressed.

10. Will clearing the P0722 code fix the issue on my 2012 Ford Fusion?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.