P0722 2007 Ford Fusion Code - Output Shaft Speed Sensor No Signal
Quick Answer
The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 2007 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
- Common causes
- Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0722 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0722 2007 Ford Fusion?
- Faulty Output Speed Sensor (OSS)
- Output Speed Sensor harness is open or shorted
- Output Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0722 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0722 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0722 2007 Ford Fusion code?
Need more information on how to fix the P0722 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 2007 Ford Fusion Code
What does the OBDII code P0722 mean for a 2007 Ford Fusion?
P0722 indicates that the transmission control module (TCM) is not receiving a signal from the output shaft speed sensor, which is critical for proper transmission operation.
What are the common symptoms of code P0722 in a 2007 Ford Fusion?
Symptoms may include erratic shifting, transmission staying in one gear, loss of speedometer functionality, and the check engine light being illuminated.
What causes the P0722 code in a 2007 Ford Fusion?
Common causes include a faulty output shaft speed sensor, damaged wiring or connectors, issues with the TCM, or internal transmission problems.
Can driving with code P0722 damage the transmission?
Yes, prolonged driving with this code may lead to transmission overheating or damage due to improper gear shifting.
How can I diagnose the P0722 code on a 2007 Ford Fusion?
Start by inspecting the output shaft speed sensor, wiring, and connectors for damage or corrosion. You can also test the sensor with a multimeter to verify functionality.
How do you fix the P0722 code in a 2007 Ford Fusion?
Repairs may involve replacing the output shaft speed sensor, repairing damaged wiring, cleaning connectors, or addressing TCM or internal transmission issues.
Where is the output shaft speed sensor located on a 2007 Ford Fusion?
The sensor is typically located on the transmission case near the output shaft, which connects to the drive axles.
Can a faulty speed sensor affect fuel efficiency?
Yes, a malfunctioning speed sensor can cause erratic transmission behavior, which may lead to decreased fuel efficiency.
Is replacing the output shaft speed sensor expensive for a 2007 Ford Fusion?
The sensor itself is relatively inexpensive, but labor costs can vary depending on the difficulty of access and the shop rates.
Do I need to reset the car’s computer after fixing the P0722 code?
Yes, after repairs, clear the code using an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for P0722 2007 Ford Fusion OBDII Code
Code P0722 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
