P0720 2010 Ford Fusion Code - Output Shaft Speed Sensor Circuit Malfunction
Quick Answer
The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0720 2010 Ford Fusion indicates Output Shaft Speed Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0720 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0720 2010 Ford Fusion?
- Faulty Output Speed Sensor (OSS)
- Output Speed Sensor harness is open or shorted
- Output Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0720 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0720 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0720 2010 Ford Fusion code?
Need more information on how to fix the P0720 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0720 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0720 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P0720 on a 2010 Ford Fusion?
The common symptoms of OBDII code P0720 on a 2010 Ford Fusion include erratic shifting, harsh shifting, and the transmission going into limp mode.
2. What does OBDII code P0720 on a 2010 Ford Fusion indicate?
OBDII code P0720 on a 2010 Ford Fusion indicates a malfunction in the output shaft speed sensor circuit.
3. What are the possible causes of OBDII code P0720 on a 2010 Ford Fusion?
Possible causes of OBDII code P0720 on a 2010 Ford Fusion include a faulty output shaft speed sensor, damaged wiring or connectors, or issues with the transmission control module.
4. How can I diagnose the output shaft speed sensor circuit malfunction on my 2010 Ford Fusion?
To diagnose the output shaft speed sensor circuit malfunction on your 2010 Ford Fusion, you can use a diagnostic scanner to read the trouble codes, check the wiring and connectors for damage, and test the output shaft speed sensor for proper functioning.
5. Can I still drive my 2010 Ford Fusion with OBDII code P0720?
It is not recommended to drive your 2010 Ford Fusion with OBDII code P0720, as it can lead to further damage to the transmission. It is best to have the issue diagnosed and repaired as soon as possible.
6. How can I repair OBDII code P0720 on my 2010 Ford Fusion?
Repairing OBDII code P0720 on your 2010 Ford Fusion may involve replacing the output shaft speed sensor, repairing damaged wiring or connectors, or reprogramming the transmission control module.
7. How much does it cost to fix OBDII code P0720 on a 2010 Ford Fusion?
The cost to fix OBDII code P0720 on a 2010 Ford Fusion can vary depending on the exact cause of the issue and the labor rates in your area. It is recommended to get a few quotes from different mechanics to compare prices.
8. Can a DIY enthusiast fix OBDII code P0720 on a 2010 Ford Fusion?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P0720 on a 2010 Ford Fusion, it is recommended to have a professional mechanic handle the repair due to the complexity of transmission systems.
9. Will resetting the OBDII code P0720 on my 2010 Ford Fusion make it go away?
Resetting the OBDII code P0720 on your 2010 Ford Fusion may temporarily turn off the check engine light, but the underlying issue causing the code will still need to be addressed to prevent further problems.
10. How can I prevent OBDII code P0720 from appearing on my 2010 Ford Fusion in the future?
To prevent OBDII code P0720 from appearing on your 2010 Ford Fusion in the future, it is important to perform regular maintenance on your vehicle, including checking the transmission system for any signs of wear or damage.
Discuss the causes and fixes for P0720 2010 Ford Fusion OBDII Code
-
How many hours does it take to put a outer speed sensor on a 2010 Ford fusion
-
The time it takes to replace the transmission output shaft speed sensor depends on my variables, but according to the book of repairs about 3.6 hours of labor. I hope that helps.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
